Announcement

Collapse
No announcement yet.

Why dont I get vtec in first

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Why dont I get vtec in first

    May be a noobish question but ........Works in every other gear correctly. (works everytime) Just not in first... vss and tach work

    #2
    I believe some ECU's won't let vtec engadge untill the car reaches 25MPH or better. Some might be a bit higher.
    ~~~~~~~

    Comment


      #3
      Originally posted by pwrusr
      I believe some ECU's won't let vtec engadge untill the car reaches 25MPH or better. Some might be a bit higher.
      I hit about 40 in first

      Comment


        #4
        What I ment was the car has to hit 25 before the vtec crossover point on the tach. I don't see why it wouldn't work though. Is the C.E.L. lit?
        ~~~~~~~

        Comment


          #5
          Originally posted by pwrusr
          What I ment was the car has to hit 25 before the vtec crossover point on the tach. I don't see why it wouldn't work though. Is the C.E.L. lit?
          o2

          Comment


            #6
            you have an O2 sensor code?
            there's your problem.

            Originally posted by kc8enb07
            does it come w/ jdm trash? they better throw away gold in it

            Comment


              #7
              Originally posted by Cb7GHOST
              you have an O2 sensor code?
              there's your problem.
              my o2 sensor code allows vtec in every gear except first?

              Comment


                #8
                Originally posted by ChIoVnIdCa
                my o2 sensor code allows vtec in every gear except first?
                Some CELs are odd like that. get it fixed and the problem will likely go away
                ~~~~~~~

                Comment


                  #9
                  Stock ecu doesn't allow vtec below 25mph i.e first. Crome/uberdata have an option to enable it.
                  Retired 1990 Accord LX Coupe
                  Project 240SX
                  Originally posted by chillin943
                  anyone kno if i can just make a hot wire for v-tec off the horn??
                  Vouches: Bought from: smseagren83, phatdoughnut, uk - accord, lucid, iamnemo, accord_inspire, 2point6, chopstickz, djcaz_aom, rosko

                  Comment

                  Working...
                  X