Are all JDM H22 injectors 355cc? Is there an OBDI OBDII difference? 92-96 JDM H22 injectors are like 355cc right?
Announcement
Collapse
Please DO NOT Post In The General Section
From this point on until otherwise briefed, posting in the general section of Performance Tech is prohibited. The only thing to remain here will be the stickies. We would just delete this section, but that would cause unintended results.
The majority of the threads created can appropriately be placed in one of the Performance Tech sub-forums or Technical; and the posting of them here is detrimental to the activity of said forums. If you have any questions about where you need to place your thread PM me or one of the other mods.
For the most part you all have caught on without this post, but there have been a few habitual offenders that forced me to say this.
Everyone will get a couple of warnings from here on out, after that I just start deleting threads.
Again if you have any questions, PM me or one of the other mods.
The majority of the threads created can appropriately be placed in one of the Performance Tech sub-forums or Technical; and the posting of them here is detrimental to the activity of said forums. If you have any questions about where you need to place your thread PM me or one of the other mods.
For the most part you all have caught on without this post, but there have been a few habitual offenders that forced me to say this.
Everyone will get a couple of warnings from here on out, after that I just start deleting threads.
Again if you have any questions, PM me or one of the other mods.
See more
See less
JDM injectors H22 all the same?
Collapse
X
-
I thought they wre like 345 but yea should be the same. The obd2 injectors are a smaller cc I forgot how much though.
The New-ish Ride
My old Ride
Hear my Vtak!!!
MK3 Member #3
I piss off people for fun.
IA 08 Sunburn Victim #1
-
92-96 obd1 h22 jdm injectors are 345cc and are peak and hold style (need a resistor box), obd2 h22 injectors are 280cc and saturation style.Retired 1990 Accord LX Coupe
Project 240SX
Originally posted by chillin943anyone kno if i can just make a hot wire for v-tec off the horn??
Comment
-
Originally posted by hemlockzSo what about USDM OBDI prelude injectors? They are smaller?Retired 1990 Accord LX Coupe
Project 240SX
Originally posted by chillin943anyone kno if i can just make a hot wire for v-tec off the horn??
Comment
-
Originally posted by turboh22aakkordjust make sure they are clean and the right size.... but $50 for a set of injectors sounds just about right...
Yes, that is a good price, I paid more for my set.
Comment
-
Originally posted by blackice92-96 obd1 h22 jdm injectors are 345cc and are peak and hold style (need a resistor box), obd2 h22 injectors are 280cc and saturation style.
Owner of https://theclunkerjunker.com
Comment
-
I called RC Engineering a while back and talked about saturated vs peak/hold type injectors. According to them, they said they put 440 cc/min saturated in an NSX, which has peak/hold originally and they did not bother removing the resistor box. It is when you do it the other way around that it doesn't work unless you modify things.
Again, that's what they said.
Comment
-
Originally posted by hemlockzI went ahead on ordered OBDI Prelude injectors. I'll recieve them and send them to Cruzin and will post the results here when I get the flow ratings back. I am not sure if these are JDM...
hold on to your butts
Comment
Comment