cp[mike] : 1992 Accord EX

[J-specCb4]

thanks. without the a/c you could easily fit two 10" fans.

it was surprisingly cheap, i got it from b18bturbo on hondatech, heres his online store: http://www.vsracing.net/catalog/prod...roducts_id=339

sweet im gonna order two of those asap!

[almostJDM]

wow im gonna have to get a few of these lol i only have one fan right now and the a/c seems fine without a fan blowing on it

[The G-Man]

You could still mount them on the engine side of the radiator and it will free up *almost* as much room.

[aero]

Very nice. I always wanted to ditch the stock monsters but they never would break on me. You got plenty more area to maneuver stuff, just make sure you dont mess up the radiator fins.

[almostJDM]

You could still mount them on the engine side of the radiator and it will free up *almost* as much room.

yea but that would defeat the purpose of having them cause they push air they dont suck it

[The G-Man]

Eh, you can adjust the way they rotate by wiring. Use one wire as positive, fan move s one way, use the other, fan moves other.

[wrichards2005]

Haha I did that slim fan reversal last year Mike. It works fine!!!

[cp[mike]]

Eh, you can adjust the way they rotate by wiring. Use one wire as positive, fan move s one way, use the other, fan moves other.

yep, plus you can remove and flip the blades over, so they are curved the other directiotn.

i installed it on the front of the condenser because its not something that should die or need maintenance anytime soon... get it out of the way, where i dont need to deal with it or its wiring ever. now my radiator can easily come and go without having to remove the fan or redo the clips.

plus theres lots of room now haha. gotta clear up space in case i ever add a couple cylinders

[Tnwagn]

gotta clear up space in case i ever add a couple cylinders

Do it

[almostJDM]

any updates mike?

[cp[mike]]

any updates mike?

ill be going outside in a few to drop it on blocks and tighten everything up

[almostJDM]

now wheels? anyways MOAR PIX pleaze lol

[cp[mike]]

now wheels? anyways MOAR PIX pleaze lol

lol...

anything touching a bushing is installed finger tight. it says not to tighten any of them until the car is on the ground. buuuuut with the height of this car, theres no way thats going to happen... so im going to put the springs & shocks in and drop the car on blocks, torque everything down, then put the wheels on.

more pics tonight.

[almostJDM]

ohhh i got ya lol sweet glad to hear your finally about ready to let her loose on the streets, just make sure to keep gps on it lol j/p

[cp[mike]]

i finished putting the suspension all together. shocks and springs are in, and the brakes are all bled ( <3 speedbleeders ). torqued and cotter pinned all the balljoints. i just need to set it on the ground and tighten a few bushings, and put the F & R strut bars on, then itll finally be rolling lol.

still need to do a valve adjustment and install the MSD/battery/ignition stuff.

sooooooooon.



heres some pics from tonight: