BB6/CB7 power steering interchangability

[wrichards2005]

Ok, here's the deal, my P/S pressure hose is shot on my bb6. I have a pump, and could easily acquire a line for a cb7, but I'm wondering if I could use either the pump, or the lines on my bb6. Does anybody have any info about this?

How about a 92-96 prelude, can I use any of the power steering components on my 5th gen? My prelude is specifically a 97, non-SH, automatic.

[NAiL05]

Buy a line for the bb6. The only way to properly make sure is to compare part numbers.

[cp[mike]]

f22 pump would stick up much higher! may even dent the hood if you close it hard enough. youd need the bracket and tensioner to go with it, plus a new belt. also an adaptor for the difference in suction hose size. and the accord p/s line will reach and connect, itll just be a huge pain in the ass and it needs to be bent a little...

totally not worth it IMO, lude pumps arent even that expensive, if you go used... i believe any 92-01 one should work..

[wrichards2005]

Thanks for the responses Mike and Nail. But the hose for the Lude (which I also need), costs ~192 at the honda dealers here. And the Lude power steering pump is 269 at my work. I haven't found the pressure hose anywhere for under 175.

[cp[mike]]

i think the hose is ~$80 at autozone, and: http://motors.search.ebay.com/search...trypage=search

[wrichards2005]

haha, Mike I'm actually the high bidder on that (before you posted). If you get a chance, can you link me to the hose? And do you know if the hose is for a 92-96, or a 97-01. I called and they said they didnt' have anything for a 97.