IACV valve?

[Rosko]

Hey Mike, I just wanted to let you know that I have been reading into this more just for curiosity's sake, and for my own potential mod list.

Apparently, the S2K TB is almost a direct swap onto the Euro R. I believe some minor porting is required because it is a 64MM TB vs 62MM, but it may have the idle passage.

**edit** after just looking it up, it does not appear to have the idle passage, but perhaps you could find some version of it that does**

I suppose it isn't a critical priority at this exact moment, but it is something you can work on.

The s2k doesn't have an idle screw but it can be installed. That part of the casting is the same they just simply left the hole untapped and didn't drill the smaller hole all the way through. Get ahold of Blackice on here I believe he has already done this.

[SilverShadow]

Does the part look like this?

I installed the part to the right (I think it's the Fast idle throttle). Part to the left is what I have extra. I'm not sure of the name for it...boost? If you or anybody needs it PM me for a really cheap price.

[Rosko]

thats an iacv on the left.

[SilverShadow]

thats an iacv on the left.

As in
Intake Air Control Valve?

[Rosko]

As in
Intake Air Control Valve?

sorry, IDLE air control valve

just a little motor/valve that opens and closes to let more or less air in to maintain a steady idle.

[SilverShadow]

sorry, IDLE air control valve

just a little motor/valve that opens and closes to let more or less air in to maintain a steady idle.

oh...thanks
Anybody interested in an IDLE air control valve? PM me if you are.


sold!

[SilverShadow]

ICV

Sold!

[SilverShadow]

Der Bense... (Andrew) did you get the part and install it? Did it work good?

[Turbo Dave]

Der Bense... (Andrew) did you get the part and install it? Did it work good?

lol thread HIJACK damn. its called a pm man... not gettin on ya case though

oh yah i replaced my iac valve mike and it stopped the stalling, however the one i replaced it with now makes the idle jump up and down +/- 75 rpms or so... and the car jerks a bit. ehh whatever

[SilverShadow]

I don't post just to post..like some...I don't know his CB7 tuner name so I can't pm him. He contacted me on AIM from info he got here. I thought these sites were to help one another and not the slap on the hands "your jacking the thread" stuff.

[Turbo Dave]

I don't post just to post..like some...I don't know his CB7 tuner name so I can't pm him. He contacted me on AIM from info he got here. I thought these sites were to help one another and not the slap on the hands "your jacking the thread" stuff.

i got banned for 2 days for "thread jacking." these site are to help one another, but there are rules. just letting you know man.

[SilverShadow]

The subject was IAVC, the part offered was of the subject to help the person who started thread and others so as to "see" the part, A member viewing this thread commented on it, and wanted it. He contacted me, I didn't get a name and asked ...where is the so called jack?

[cp[mike]]

kthxbye