Rear motor mount swap?

[pwrusr]

Sup guys, I have a question that's been getting to me for a wile now.
My rear motor mount is pretty much trashed. The current mount is from the automatic accord. Most of you should know what I'm talking about. it has a vacume line attached to it.

Now onto the subject of the thread... Can I swap in a manual accord rear mount? the mount that is made from rubber. If it's not a direct swap in, what's needed to swap it in?

[pwrusr]

Also does anyone know of a easy way to take that thing out?

[h22sparkle]

What the mount itself? or that hose?

[cp[mike]]

youd need the rear mount bracket that bolts to the block too... and im pretty sure the bolt itself was a different length.

[pwrusr]

Originally posted by cpmike
youd need the rear mount bracket that bolts to the block too... and im pretty sure the bolt itself was a different length.

That's kinda what I thought I'd need to do. Thanks alot

now all I need to do is raid a junkyard

*edit* do you know of a easy way to remove the old mount and bracket?

[cp[mike]]

Originally posted by pwrusr
*edit* do you know of a easy way to remove the old mount and bracket?

wish i did. antoine said he got to it from the top, think he pulled off the intake mani? whichever way you go, its an ordeal.

[accordingly2004]

So its possible to switch from an auto rear mount to a mani mount. Keep us posted because im interested.

[turbo90accord]

yes it is possible use the DX mount becaust it is allot stronger for some odd reason. you can visually see the difference between the dx,lx,ex rear mounts. the lx has allot more rubber in it. you have to get the rear bracket for the block and a new bolt too. so 3 parts total. the easiest way to get the old one out is taking the intake manifold off. it nearly impossible any other way and you definatly cannot do it from underneith the car. get some super long extensions for your ratchets!!!