Pin Wiring Help...(Pics)

[93Akkord]

Ok so I believe that I hooked up the wiring wrong. I believe the vtec switch needs to go were the red and blue wire is. but I thought that was the knock sensor....newbie needs help!

wierd thing is..I think the knock sensor is the red and blue wire...but thats in the wrong spot....right?

[d112crzy]

nope.

the vtec pressure switch is that blue/red one, the knock sensor is d3, which is the 2nd hole on the top, from the left.

[93Akkord]

nope.

the vtec pressure switch is that blue/red one, the knock sensor is d3, which is the 2nd hole on the top, from the left.

better pic huh? hehe....I'm still wondering why I'm not getting a cel for the knock sensor.

[d112crzy]

heres a labeled pic

[93Akkord]

awesome thanks!

now anyone have a better explaining way of taking the pins out? I accidentally stuck it in the wrong slot and now I can't get it out. I don't feel no tab at the bottom. the damn thing doesnt want to come out! lol

[cp[mike]]

dont pull on the wire while youre trying to find the tab with the pin, push the wire further IN to the connector, to make sure its fully loose. hold the wire in and feel for the tab with the pin, and once you feel it hooked, THEN pull the wire out.

no other way to really explain it

[93Akkord]

dont pull on the wire while youre trying to find the tab with the pin, push the wire further IN to the connector, to make sure its fully loose. hold the wire in and feel for the tab with the pin, and once you feel it hooked, THEN pull the wire out.

no other way to really explain it

sweet..I'll try that...didn't know I had to push in with the wire.

[cp[mike]]

sweet..I'll try that...didn't know I had to push in with the wire.

even lightly pulling on it, itll jam the tab under the pin and make it sometimes impossible to pull out without destroying it