Announcement

Collapse
No announcement yet.

need help on h22 swap

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    need help on h22 swap

    i need help with my clutch
    i did my swap but my clutch does not pump i already beed it and it just stays to the floor
    so please help
    Tags: None
    #2
    Originally posted by Cali90Accordlx
    i need help with my clutch
    i did my swap but my clutch does not pump i already beed it and it just stays to the floor
    so please help

    Bleeding the clutch is gonna take some time man. After a while you will feel pressure build up...but yea took me like 25 min or so to bleed it lol then I found a somewhat faster way was to open up the line that goes onto your trans from the mc and that will get out some of the bubbles quicker then bleed it from the slave.

    The New-ish Ride
    My old Ride
    Hear my Vtak!!!
    MK3 Member #3
    I piss off people for fun.
    IA 08 Sunburn Victim #1

    Comment

      #3
      damn, its never taken me more than 10 minutes to fully bleed a clutch. you sure you guys dont have any leaks?

      CrzyTuning now offering port services

      Comment

        #4
        i did bleed it like 2 times already at one point it was getting stiffer but then it went to the floor agian
        would ti matter if i have the front end in the air?

        Comment

          #5
          Could be a bad clutch master cylinder. That's what happened to mine.
          Originally posted by Junior Smurff
          Nevermind guys, google search works wonders!

          I don't have road rage, my car just goes faster than yours!

          Accords are for winners. And Grandmothers. But mostly winners.

          I have grown so Tired of Internet Illiteracy. Please learn proper spelling and grammar. For your sake and that of your children.

          Comment

            #6
            Originally posted by Cali90Accordlx
            i did bleed it like 2 times already at one point it was getting stiffer but then it went to the floor agian
            would ti matter if i have the front end in the air?
            did you let the reservoir get too low? make sure its fully topped off during the whole procedure, or itll suck air back into the line.

            and no it doesnt matter if the front end is jacked up.


            - 1993 Accord LX - White sedan (sold)
            - 1993 Accord EX - White sedan (wrecked)
            - 1991 Accord EX - White sedan (sold)
            - 1990 Accord EX - Grey sedan (sold)
            - 1993 Accord EX - White sedan (sold)
            - 1992 Accord EX - White coupe (sold)
            - 1993 Accord EX - Grey coupe (stolen)
            - 1993 Accord SE - Gold coupe (sold)
            Current cars:
            - 2005 Subaru Legacy GT Wagon - Daily driver
            - 2004 Chevrolet Express AWD - Camper conversion

            Comment

              #7
              you might also have a leak in one of the lines...try to get someone else to look at the lines to make sure there are no leaks


              Originally posted by fizzbob7
              first off, don't be a sissy bitch.....that's what you're being
              Originally posted by ACC0RD22
              no need to get sand in your vagina over this guys.
              So. Cal OUTLAWZ

              Comment

                #8
                That sure is alot on bleeding on the clutch. I don't think I've had to do it for over 5 minutes on my H23 when I swapped the clutch and master cylinder.

                Evolution

                Comment

                  #9
                  thanks for the help but i put the bearing inside the trany wrong but i fixed it and my car is running fine so far

                  Comment

                    #10
                    Originally posted by Cali90Accordlx
                    thanks for the help but i put the bearing inside the trany wrong
                    You talkin TO Bearing??? How did you do that???

                    The New-ish Ride
                    My old Ride
                    Hear my Vtak!!!
                    MK3 Member #3
                    I piss off people for fun.
                    IA 08 Sunburn Victim #1

                    Comment

                      #11
                      lol. it only goes on one way doesnt it?

                      Owner of https://theclunkerjunker.com

                      Comment

                        #12
                        Originally posted by Accord R33
                        lol. it only goes on one way doesnt it?
                        Thats what I thought at least lol.

                        The New-ish Ride
                        My old Ride
                        Hear my Vtak!!!
                        MK3 Member #3
                        I piss off people for fun.
                        IA 08 Sunburn Victim #1

                        Comment

                        Previous template Next
                        Working...
                        X