H22A4 Power Steering

[bbhondacb793]

I am in the middle of my H22A4 swap and want to keep my power steering, btw, the motor has no brackets for power steering or a.c. (previous owner took them off). For someone that is running power steering with this motor did you just use the H22a4 bracket and pump or did you use your accord power steering pump with the H22A4 bracket. This question also applies to the A.C. that I also want to keep. Thanks in advance.

[bbhondacb793]

bump

[rebels]

The Accord bracket for the power steering pump will fit on the motor, but not all bolts line up. The 3 bolts will hold it good enough..

Another thing you can do is put the Prelude bracket on there (buy one if you need it) and use the Prelude pump. It sits lower than the Accord one, so if you have any clearance issues with your hood then you may need the Prelude pump and line.

[cp[mike]]

if you run a search or take a look at the sticky at the top of your forum, youll see this:

http://www.cb7tuner.com/vbb/showthre...&threadid=5423

scroll down to where it talks about power steering.