H22 wiring Qs...

[xScott]

-Does the fan switch on the thermostat housing need to be lenghtned, or is there enough wire in the F22 harness?

-How about the plugs on the front of the distrubitatior? Can I just unwrap my F22 harness to free up some wire?

THANKS!

[cp[mike]]

if you cut some of the looming off, the thermostat plug can reach, but its kinda tight. ive always cut and lengthened and reloomed them.

for the dizzy, take that little screw out and run the plugs up and over the top of the dizzy, and connect them to the harness behind the dizzy, more towards the firewall, they should reach no problem.

[xScott]

Originally posted by cpmike
if you cut some of the looming off, the thermostat plug can reach, but its kinda tight. ive always cut and lengthened and reloomed them.

for the dizzy, take that little screw out and run the plugs up and over the top of the dizzy, and connect them to the harness behind the dizzy, more towards the firewall, they should reach no problem.

Cool man. Thanks!

[turboacord25]

dont get the ect and the fan switch plugg mixed up man cuz thats what got my ass for a month before cp mike helped me figure out my vtec