OEM Foglight Switch Diagram

[cp[mike]]

what kind of switch are you using, one of the ones that mounts in the ebrake console? they used a different plug than the OEM dash-mounted foglight switch. my diagram works with the OEM switch, i havent had a chance to take apart the rest of my switches to figure out their wiring harnesses yet.

[MikeW]

Just got the switch today. Its either CD or CB. Pigtail has 6 wires.

Whats the worst that can happen if i start mixing/matching wires?

[MikeW]

Integra switch....




....

[cp[mike]]

you never answered one of my questions, is it the OEM switch for the dashboard, or one of the switches that fit in the ebrake console?

[C91BLX7]

you never answered one of my questions, is it the OEM switch for the dashboard, or one of the switches that fit in the ebrake console?

It looks just like a CD dash switch, except its got the six wires and a 4wide connector.

[Night Wolf]

lol Ill post what each of the wires do for the dash fog switch tomarrow in my "all OEM CB & other honda switches diagrams" topic...

http://www.cb7tuner.com/vbb/showthread.php?t=120233

[MikeW]

Its a CD5 switch. Came out of HondaGuy121's 96.

I got it to work following the above Integra diagram, except the face doesnt light up at all. The indicator light comes on when switched, but ill have to figure out how to wire up the face.

Pics will be somewhere. Here or my MRT.

[Night Wolf]

take a pic of the back of your switch. I will tell you what each wire does. & where to place it

[MikeW]

This is what wires came attached...


The switch itself looks identical to this.....


4 pins on the bottom, then 2 on top. Like this.....

-||-
----

Like i said, i got it wired up so they wor, i just need to figure out how to get the face to light up.

[Night Wolf]

here...


it was listed in my "all OEM CB & other honda switches diagrams" topic


also your missing pins

[MikeW]

Thanks.

[93 LX COUPE]

My pigtail has 6 wires....

Looks like this...


My setup looks like this...


Something that caught my eye was this...



My fogs came with 2 wire attached; a red/blue and black(with brown dots). The blk went to the batt(-) and the red/blue went into pin 30 of the relay.

Im just curious if anyone has seen this or knows what wires go to what.

thanks for these pics this will help me out alot installing my lexus es300 fogs and jdm switch

[DejectedAngel]

My switch is exactly like the one pictures. Which is the diagram for the wires or is the first post the right one?

This diagram is different from my switch.

[ACCORDEX92]

Doing my fogs this weekend thanks

[loud92CB7]

QUESTION!!!!!! umm what other harnesses will plug into a fog switch and still have all the wires needed to make this work like OEM???