wire tuck help!!

[blackenwkn]

alright guys ive tried searching and cant seem to find where this part gets grounded down to maybe i misunderstood but i thought you wouldn't have to cut or extend any wires except the high beams i wouldn't mind cutting but would much rather not have to

[GhostAccord]

It can be grounded by slipping it under any bolt that connects to the chassis. If there are non in the immediate area, you could try drilling a hole or using a self tapping sheet metal screw and screw it into the upper wheel well frame.

[Jarrett]

Exactly. Wire tucks are not a one-size-fits-all procedure.

[blackenwkn]

Exactly. Wire tucks are not a one-size-fits-all procedure.

i didnt expect it to be i was just wondering where other people located it

[blackenwkn]

It can be grounded by slipping it under any bolt that connects to the chassis. If there are non in the immediate area, you could try drilling a hole or using a self tapping sheet metal screw and screw it into the upper wheel well frame.

appreciate it buddy ill see what i can do

[cp[mike]]

i put a 10mm bolt through an existing hole and mounted the ground from the back of the inner fender:

[blackenwkn]

i put a 10mm bolt through an existing hole and mounted the ground from the back of the inner fender:

did you extend anything? mine gets about to the top of the wheel well i mounted it there and gonna run to the jy and cut some wires to extend the high beams corner lights and bumper lights im not running ac or a fan on the right side so i dont really have that much pretty much just the lights

[cp[mike]]

did you extend anything? mine gets about to the top of the wheel well i mounted it there and gonna run to the jy and cut some wires to extend the high beams corner lights and bumper lights im not running ac or a fan on the right side so i dont really have that much pretty much just the lights

i think only 2 or 3 wires i had to cut and extend, but they were all minor. One was for the brake reservoir cap, i think another was a random ground wire. The other, who knows, I just cut it I also relocated the corner light wiring to go to the sidemarkers instead.

I also had the wires exit into the fender in a spot different than other people, which might have given me more slack:

[blackenwkn]

well this is how it turned out

[xkjnboix]

looks great, i cant live without p/s cc and a/c tho =P

[blackenwkn]

looks great, i cant live without p/s cc and a/c tho =P

Yea it's not my daily lol I live in Texas so A/C is a must lol

[antonio7566]

Looking good is that it or are you doing more later on?