2 finds thats got me stumped (@__@)

[loud92CB7]

urdone has posted them and they are stickied.

[cp[mike]]

something needs to be connected to that CD changer port on the back of the stock radio for it to output any audio. be it a real CD changer (you pictured the plug) or the null plug installed. if you just leave the connector open and unused it wont work. you can find a plug on the back of any radio that was in a car without a changer.

[4GAccordH22]

If your SE has (or had) the Bose system with the amp in the trunk, the wiring is quite different. The Bose system used a common ground system for the speakers, so you will need the SE dash harness, at least for the radio... Also, the Bose system had 4 ohm speakers instead of the standard 8 ohm on the standard radio. I had to rewire the speakers in my SE to use an aftermarket deck as the Bose system was long gone when I got the car and the radio that it had been replaced with was a very hokey install job.

[The G-Man]

Damn so that is where they install lojack on our cars. Lots of work to install them then. Taking out the dash and such.

[cp[mike]]

probably could manage to get that in there just by removing the glovebox. also judging by the single screw and the angle its pointing at.

as for your silent audio...
#3 "CONNECTOR, SHORT (DIN)" 39105-SE0-A31