94-97 exhaust on a 90-93?

[93H22LX]

I was wondering if a catback from a 95' Accord sedan would fit (or could be made to fit) a 93' Accord sedan?

I know lots of parts from these 2 different generations of accords will work on each other and I'm hoping the same goes for the catback exhaust. I found a really good deal on a greddy SP2 but dont want to get it unless it will fit. Let me know what you guys think.

[deevergote]

There is a reason why the exhaust designs aren't for 90-97. It will not fit unless you hack up the piping to MAKE it fit. If you can get it cheap enough to just have the muffler, do that, and get some custom mandrel bent piping from www.kteller.com.

[quickangel93]

why not just get a custom cat back exhaust? no bends = no leaks.

[cp[mike]]

it fits perfectly besides the part near the cat/downpipe, its too long. itd have to be cut shorter and rewelded, making it probably not worth the "good price" u found.

[Davids92Accord]

i have a 94-97 greddy sp2 exhaust installed in my car and all the guy did at the shop was remove one of the resonators and just weld it back on i only spent 75 bucks on the whole installation

[93H22LX]

There is a reason why the exhaust designs aren't for 90-97.

I used to have a 89' Integra that had a 90-93 Integra RS*R exhaust on it that bolted up perfectly. But yet when you email them they say they dont make anything for the 86-89 Integra, even though the 90-93 fit the 86-89 perfectly. Go figure.


Anyways, so it sounds like it will work but needs to be modded. I can get it for a really good price, 150$, but I'm going to check around and see how much it will cost to have the resonator cut out and welded back together. If it anywhere near 100$ I think I'll just go with one of the kteller kits with a Skunk2 muffler I already have. I plan on going H22 soon and the 2.5" would be a little bit nicer than the 2.36" on the Greddy anyway.