Seatbelt swap

[MikeW]

I'm in the process of swapping my tan interior for a black/gray one and i was wandering how do/can i swap out the seatbelts? Especially the ones that live up inside the 2 middle and rear pillars. If its one of those things im just gonna have to live with then i guess ill deal, but if anybodys done this successfully, let me know.

[buckt3]

seat belt

what year is your car 90-91 or 92-93 (very important)

mine is a 90 and i got a all new interior from a 92 and next week end i am going to swap everything i will take pics and post them on here or the DIY thread. Give me a week and i will let you know. Later

[Jarrett]

what year is your car 90-91 or 92-93 (very important)

mine is a 90 and i got a all new interior from a 92 and next week end i am going to swap everything i will take pics and post them on here or the DIY thread. Give me a week and i will let you know. Later

Like he said the year really matters. The '90-'91s had power seatbelts and a centered e-brake handle.

[MikeW]

Sorry, guess i shouldve mentioned ::Had newb moment:: its a 92. i know the 90-91s have the moving power belts, i have the manual ones that pull out of the pillars. My e-brake isnt centered either, its off the one side of the console--HEY, while im at it, how do you pull the cover off the ebrake handle?? Ive pulled my console off, front to back and ive pulled and tugged on that fucker and i cant get it off!! ..ahem..but yes, a DIY for that would be helpful

[buckt3]

search the forms.
I will be changing the interior in my car this weekend and i will be posting the DIY on the DIY Thread look their in about a week i will have the answer there

[PakaloloHonda]

I'm in the process of swapping my tan interior for a black/gray one and i was wandering how do/can i swap out the seatbelts? Especially the ones that live up inside the 2 middle and rear pillars. If its one of those things im just gonna have to live with then i guess ill deal, but if anybodys done this successfully, let me know.

I just PM'd buckt3, as I'm also in the process of swaping my gray interior to tan.
I went to his profile, and I didnt see a thread that was started in the DIY section either.

Is it necessary to remove the front seats to install the front seatbelts? Looks like
it could be a bitch trying to do it with them in tho .. so it could be better to remove them?

Anyone reading this that has done a seatbelt swap .. chime in and let us know ..

*oops .. I should mention that I have a 90 LX with the power belts*

Thanks
Tomi

[buckt3]

never got around to start a diy still trying to convert the seatbelts to many wires and you have to replace the under dash fuse box

[cp[mike]]

the top cap on the slider pulls off, 17mm bolt underneath. that separates the belt from the slider. behind the lower pillar panel, youll clearly see how to remove the spool.

phatdoughnut made a DIY for swapping 9091 to 9293 seatbelts.

i think its funny people are just starting to do this, i swapped out my whole interior for a different color years ago, me and coco traded

[buckt3]

i searched and cannot find the diy where is it

[cp[mike]]

search for "seatbelt swap" if the DIY doesnt come up immediately, look thru the other threads, things like this are usually discussed multiple times. youll often find the DIY link posted in other threads as well.