Tube seal part numbers

[A Zombies Minge]

Just want to confirm I am buying the right seals to do my upper and lower spark plug seals. These are my suspected parts numbers and links to diagrams confirming part locations.

Lower tube seals p/n: 91301-PT0-003, illustration# 19
http://www.hondaautomotiveparts.com/...AD&vinsrch=yes

Upper tube seals p/n: 12342-PT0-000, illustration# 4
http://www.hondaautomotiveparts.com/...ER&vinsrch=yes

I feel stupid even asking, but I hate spending money on the wrong parts and was just hoping someone that has done this before could confirm the parts numbers.

[GeoffM]

Just want to confirm I am buying the right seals to do my upper and lower spark plug seals. These are my suspected parts numbers and links to diagrams confirming part locations.

Lower tube seals p/n: 91301-PT0-003, illustration# 19
http://www.hondaautomotiveparts.com/...AD&vinsrch=yes

Upper tube seals p/n: 12342-PT0-000, illustration# 4
http://www.hondaautomotiveparts.com/...ER&vinsrch=yes

I feel stupid even asking, but I hate spending money on the wrong parts and was just hoping someone that has done this before could confirm the parts numbers.

Don't feel stupid, I literally just made this EXACT thread yesterday!
No answers though, so that wasn't sarcasm.

Hopefully you'll get somewhere. I need the same info.

[A Zombies Minge]

I am going to go out onto a limb and assume that since we are both looking at the same parts, we may be right....

[blu35p4rr0w]

Looking at the illustration I would say you're correct. Also I'd like to thank you personally. They have the studs I was looking for! I just replaced my seals but I got them from Napa(Felpro). When the seals need replacing again I will go with these guys instead and just wait for them to come in the mail. You're awesome Minge! (edit: Then again, I was just told there IS a Honda dealership in Covington. A bit too far to walk, but now that I have the part numbers, thank you again Minge, I might call them up for a price check and see if I can get a coworker to bring me by there if it's cheaper to do it local than order and ship.)

I replaced 3,4 & 9 from the second link & 19 from the first. That's what came in the Gasket set I purchased from Napa. It was like $26 after tax from napa. However If you're just looking for tube seals(I just went ahead and replaced everything just for the heck of it) and want Honda not Felpro looks like you've got a good find with that site. Doesn't look like it would cost much more either.

Also, if you guys want, I'll look at the part numbers on the box I got, usually the part number is the same even though it's different manufacturers. Won't be able to look till about 7:30am though. I'm at work right now. HAH

[GhostAccord]

Most valve cover gasket sets come with everything, However if you want to buy them seperate go by the following Pn's;
Valve cover gasket - 12341-PT0-000
Oil Filler O-Ring - 15610-PC6-000
Valve cover nut washer gasket - 90441-PT0-000
Upper tube seal - 12342-PT0-000
Lower tube O-Ring - 91301-PT0-003