Ok I just installed my rear disc setup awhile ago. I just instaled my rear brake pads today. I did notice that one of my brake lines was a bit longer then the other but not by much. Only one side engaged , I havent tighten the e brake handle itself yet. If I adjust the lines a bit more will they even out?
-
-
What do you mean by " a bit longer "
And how did you verify only one side engaged? -
Like an half in or so longer.
I pulled the ebrake up and tried rotating the both wheels by hand the passenger side locked up and the driver side did not.Comment
-
Wait you said you installed new pads...
Your pads aren't worn in yetComment
-
No, I dont have a motor in my car yet I'm basically rebuilding my whole brake and suspension setup. I'm going to tighten m\the hand brake and see what happens tomorrowComment
-
Remember: Press the brake several times to engage. Then pull up the Parking brake lever one click. Tighten till you feel a slight drag on the wheels.
Cliff notes versionMRT
37.5 MPG, AC on, cruising at 80.
30.0 MPG, AC on, aggressively driving around 90.
27.5 MPG, no AC, cruising at 90 with occasional gridlock. 40 degrees Fahrenheit
Lots of DIY videos specifically for our car
Get some awesome wipers! <-- It's a DIY
Originally posted by Tippey764Originally posted by deevergoteComment
-
Damn didnt know that. I guess I need to install all my braking componet's in the bay then. Thanx for the help guysOriginally posted by GeoffMisiak View Post
Comment
Comment