We got the 98 rl seats ths thread is back I have both seats moving going to fab them in this weekend
she is empty and ready to the take the seats on tomoro will keep you up too date with the install and proggie pictures along the way.
Backseats done.
Getting her cleaned and ready to be fabbed and wired this weekend, and I will use rain gutter repair.
I got the front bolts lined up and this is the first time shes been mounted properly.
passenger side
drivers side
used a 10.9 grade flange nut and welded For the rear inside seat mounts.
this one was a bit harder to do, had to drill spot welded and relocate( this is super thin metal). I did the passenger's side first and made some mistake as you can see I cut the top and wanted to move bolt housing, but decided to do this which was the longer harder method
Now I should have done this for both sides.
UPDATE Finished Still working on car, but everything is working the power and heated seats.
she is empty and ready to the take the seats on tomoro will keep you up too date with the install and proggie pictures along the way.
Backseats done.
Getting her cleaned and ready to be fabbed and wired this weekend, and I will use rain gutter repair.
I got the front bolts lined up and this is the first time shes been mounted properly.
passenger side
drivers side
used a 10.9 grade flange nut and welded For the rear inside seat mounts.
this one was a bit harder to do, had to drill spot welded and relocate( this is super thin metal). I did the passenger's side first and made some mistake as you can see I cut the top and wanted to move bolt housing, but decided to do this which was the longer harder method
Now I should have done this for both sides.
UPDATE Finished Still working on car, but everything is working the power and heated seats.
Comment