well.. i have my hood raised on the top end part.. i dont have pix on how to do it..
but wat u need is
-10mm socket.. and a wrench
-spacers.. any size that suites your needs.. or if u have a skateboard.. u can use the 4 scateboard bearings
-longer screws.. not too long
ok well..
- unscrew ur hood
- put the bearings or spacers in between the hood and the hinge...
- screw ur hood with long enough screws.. not too long that it hits the top part of your hood
- put all 4.. tighten it
- and see the results
here are pix of how mine turned out
but wat u need is
-10mm socket.. and a wrench
-spacers.. any size that suites your needs.. or if u have a skateboard.. u can use the 4 scateboard bearings
-longer screws.. not too long
ok well..
- unscrew ur hood
- put the bearings or spacers in between the hood and the hinge...
- screw ur hood with long enough screws.. not too long that it hits the top part of your hood
- put all 4.. tighten it
- and see the results
here are pix of how mine turned out
Comment