August 2006 Nominations

[deevergote]

Check out the Rules & Regulations here - invalid nominations WILL be deleted!
Please observe the format for nomination displayed here


Members must have 50 posts in order to nominate someone
Duplicate nominations will be deleted
Posts made that are not nominations will be deleted
Invalid nominations will be deleted


There is no need to second a nomination! If a nomination is valid, it will proceed to the voting stage automatically.


PLEASE post nominations correctly. Invalid nominations WILL be deleted!


Please only post ONE picture with your nomination. More pictures can be seen in the Member's Rides thread you link to!

[f20baccord]

I nominate Shawn Hayden because his car is one of the cars that inspired me to get a cb7 an start workin on them..and his car is just pure sex lol!
http://www.cb7tuner.com/vbb/showthread.php?t=1355


//MODS\\

::Interior::
Cheap Panasonic H/U
JDM 270mm Blue Tinted Napolex Broadway Mirror
JDM CTR Shift Boot
MOMO Monte Carlo Steering Wheel
92-96 Prelude Seats
Fushigi RES Short Shifter
BLOX Racing Shift Knob
Dashboard Buddah
20% Window Tint

::I.C.E.::
Clarion 6.5's in doors and rear deck
Clarion tweets in doors

::Exterior::
JDM One Piece headlights w/ DIY Nissan Silvia gray housing
JDM GSquare Grill
JDM Power Folding Mirrors
JDM Accord Coupe Badge
JDM CB Sidemarkers
JDM Fog Lights
OEM 94-95 EX Front Lip
VIS OEM CF Hood
CF1 CF Trunk Lid #13

::Suspension::
15" ITR's w~ 205/50/15 Kumho 711's
Dropzone Adjustable Coilovers
Dropzone struts (rear)
KYB AGX adjustable struts (front)

::Under the Hood (and out the back)::
JDM OBD1 H22A
96 EX Accord Tranny
OEM Air "Stealth" box
DC Sports Header (not mine, borrowed)
P28 Uberdata chipped
NO P/S
NO A/C



Whats Coming Up?
ST Sway bar rear
KSport Coilovers
More of course!

[JDM_EJ]

I nominate TypeG because you can use his car as a mirror! You can see your reflection in his stinkin exhaust heat shield!

TypeG : 1991 Accord EX



Engine
-polished- valve cover, heatsheild, oil cap, power steering pump, alternator, starter, distributor, thermostat housing, fuel injector resister, cruise control, radiator cap and brackets, part of head and block, intake tube, battery tie down, a/c lines, pwr steering line, -soon-intake mani-
-K&N intake
-borla exhaust
-mr. gasket clear distributor cap and rotor
-manual trans

Interior
-metal dash kit
-shift knob
-billet cig lighter
-polished billet a/c knobs
-some black SE parts
-modified stock mirror

Exterior
-all red taillights
-trenz billet grill (part#2092-HP)
-5% tint
-OEM paint
-one off cornerlights ( Depo brand clear corners with amber painted insert)
-one off bumper lights (Depo brand clear bumperlights with inside painted amber and outer lens painted with nightshades)

Suspention
-skunk2 coilovers
-stock wheels
-OEM struts
-NO camber kit


Future Plans
-do something besides wash it

[DhN]

I nominate jdmtrikcb7..Cleaaaan cb7..show and go..interior is sick..i was in the members rides forum and jus saw this one and it blew me away..

http://www.cb7tuner.com/vbb/showthre...6&page=1&pp=20



ENGINE
h22 swap
portflow head
fearra over size valves
portflow high rev dual valve springs and keepers
type s cam shaft
type s over size piston
blue print and blance crank shaft and connecting rods
DC header 4-2-1
str cam gears
msd 6L ignition
spoon reseivor socks
stock intake system with KN airfilter drop in
greedy sp cat back system
clutch master stag 3
locking differential (quafie)
neuspeed short shifter
euro type r valve cover

SUSPENSION
tanaba sustec ss coil over system
full prothan bushing
suspension tech sway bars
goodrich brake lines
spoon calipers

WHEELS
17' volkracing av3
16' dunlop cpr's
15' mugen m7

INTERIOR
pair recaro srd
custom black and tan rear seats
speedware custom harness bar
cusco 6 point cage
takata 4 point harness
mugen pedals
hkb hub/signal quick release steering wheel
momo tuner steering wheel with mugen horn button
jdm honda roadflare
kenwood head unit
MB quart door speaker

EXTERIOR
jdm 1 piece healights
atlantis blue pearl paint
carbon fiber hood
rear edm foglight
benen tow hooks
jdm bumper pole

more to come car is under construction with new goodies

[ray ray]

id like to nominate bullet for aotm. hes done lots to his car this year and its coming along nicely.

http://www.cb7tuner.com/vbb/showthread.php?t=20298


Engine:F22a1
157,145 miles on original engine

auto tranny


Engine Mods:
AEM short ram intake
XTune 4-2-1 Header
No name muffler with 4 1/2 in tip
Optima red top battery
NGK Plugs

Engine parts not on the car:
f22a6 Intake
Suspension:
Tokico Hp struts
Megan racing springs (2.0F & 1.78R)
Megan racing gunmetal strut bars

Interior: Stock

Exterior:
Black Bumper lenses
Black corner lenses
Black jdm style Tails--sold
Black housed headlights coming soon
25% window tint

Wheels:
17x7 DrifZ racing wheels silver with a polished lip wrapped in 205/40/17s

ICE:
Kenwood KDC-3028 cd player
Crossfire 6 1/2's all round

Security:
CLifford rsx 3.5 alarm/keyless entry/remote start

Future Plans:
Blackhoused headlights with yellow highs
Mugen Lip
G-square grille or modification to stock grille
OEM Carbon fiber hood
Red/Clear Tails
f22a1/a6 swap
5spd swap
boooooost
and some other jdm goodies...

[R33cb7]

I nominate According2Aaron. He has one of the tightest CB7's here! An excellent choice for AOTM.

http://www.cb7tuner.com/vbb/showthread.php?t=32920




ENGINE / EXHAUST:
- eBay short ram intake
- 5-speed transmission conversion
- Valve cover, exhaust manifold heat shield, and spark plug wires spray painted Ford Dark Blue

WHEELS / SUSPENSION:
- Stock wheels, minus wheel covers
- Coilover sleeveovers

BRAKES:
- OEM brakes

EXTERIOR:
- Black car originally, but was painted white
- Black vinyl stripes on the sides
- Black wing
- Empty front bumper
- DIY black mesh grille
- DIY Suicide trunk
- '90 taillights painted over white
- '92 outer taillights
- clear corner turn signals
- X rear badges shaved off
- dryer vent on right side of front bumper for direct intake
- shaved molding
- X hood left black to look like a carbon fiber hood
- Hood primered white
- SunPro tachometer installed on hood

INTERIOR:
- sheet metal center console
- DIY short shifter
- different shift boot
- Push-button ignition
- X Toggle switch for the cooling fan (switch is now inactive because the fans were made automatic again during the new engine installation)
- Water and voltage guages above glove box
- Buttons, bezels, and vents painted white
- Aftermarket pedal covers
- Sheet metal driver's floor mat

FUTURE MODIFICATIONS:

- Camaro Z28 louvers in hood

[HondaGuy1212]

I nominate abdielitopr This cb7 is really clean inside and out it has a great stance and the rims compliment very nicely. This Cb7 is AOTM with out a doubt

http://www.cb7tuner.com/vbb/showthre...9&page=1&pp=20



MOD LIST:


Engine:
-JDM H22a
-JDM H22a Downpipe
-JDM MP04 Auto Tranny
-Short Air Intake
-Working A/C , P/S and Cruise Control

Exterior:
Smoked Corners
Smoked Signals
Red/Smoked Tailights
'92 Black housed + Yellow HB Headlights (On Car)
'92 Blacked out Grill (On Car)
'91 Blacked out Grill with Accord emblem
'91 Black housed + Yellow HB Headlights
Black [H] emblem on back
Front Lip: Acura Legend
Halogen Fog Lights

Interior:
Stock

Wheels | Suspension:
-16" TSW Evo (On Car)
-98 Accord Wheels
-Front & Back Coilovers with Camber Kits
-Arospeed Strut Bar

Current Projects:
-Just bought a pair of '92 OEM headlights, will be blackhousing them soon. Done and on car
-CB7 EX OEM lip (SOLD )
-91 Accord OEM grill (Probably do a blackout and place an emblem on the right side) Done
-92 Accord OEM grill (Removing the center and leave Honda emblem) Currently working on it, but on car

[97Lude]

I nominate USC. One clean and quality Accord.

1993 Accord EX

ENGINE / EXHAUST:
- Remus dual-tip exhaust

WHEELS / SUSPENSION:
- 17x7.5 et+45 Black Racing Pro N1 in bronze (stolen)
- 17x7.5 et+40 Volk Racing TE-37 in bronze
- 215/40zr17
- Neuspeed Race Springs
- Koni Sport adjustable shocks
- Suspension Technique rear swaybar
- Ingalls front camber kit

BRAKES:
- Brembo Gran Turismo brake kit
- 13" x-drilled/directional-vaned vented rotors (328mm x 28mm)
- Lotus 4-piston (36mm, 40mm) calipers
- Goodridge SS lines
- Dot4 brake fluid

EXTERIOR:
- Honda ECE headlamps imported from Europe (h4/h1)
- Honda ECE clear corner lamps imported from Europe
- HID H4-retrofit in low beam housing
- Honda moonroof visor
- G-Square Grille (in storage)
- Chargespeed Grille (modified)
- D.I.Y. headlight eyebrows (in storage)
- Custom bumper fog conversion
- FormulaONE Ultimate Series 38 automotive film

INTERIOR:
- Honda floor mats
- Custom floor-board lighting
- Sony HU (some really old crap)

[PRIMOCB7]

i am nominating 91accordexr33 once again. a cb7 that falls under the "kitted -n- clean" category and w/ a boosted setup to match as well.



ENGINE
F22a4 SOHC
H23/F22b intake manifold/TB
NGK blue 8mm wires
TD05H EVO 3 16g 7cm^2
DSM manifold, heatwrapped
DSM 8 PSI wastegate
Blitz Dual Drive BOV
JDM Relief/pop-off valve
2.5" charge pipes
DSM 450cc injectors
Stealthmode Oil Line Kit
PWR Motorsports Front Mount Intercooler
Turbo XS Dual Stage Boost Controller
Greddy style oil catch can

Transmission
H22ax usdm 5 spd
Quaife LSD
Clutch Specialties 6 Puck Clutch
ACT Heavy Duty Pressure Plate
Stock Resurfaced Flywheel

EXHAUST
2.5" downpipe to stock flexpipe
Catco High-flow Cat
Custom Magnaflow Dual Exhaust tips (resonated)
Magnaflow 22 inch resonator
Magnaflow 14 inch muffler, single in dual out
DMH Performance Electric Cutout

EXTERIOR
R33 Front Bumper
M3 sideskirts
BW rear
Wings West Thruster Wing
DIY blackhoused headlights and corner lights
M3 Mirrors
Red clear tails
DIY 91 grill

INTERIOR
Indiglo Glow guages
JDM Squash Air Freshner
Autometer Phantom series 20 psi boost guage

SUSPENSION/WHEELS
18 inch ADR Spade Gunmetallic Rims
Nitto NEO-GEN 225 40's
Eibach Prokit 1.2" drop
KYB Gr-2 shocks
Rotor over hub conversion
Prelude VTEC 11.2" rotors, crossdrilled and slotted
Prelude VTEC Calipers

AUDIO/ELECTRONICS
Sony Explode Head Unit
Audiobahn 6.5, 6x9
Zeitronix Wideband kit with LCD
JL 10" sub with probass superbox

FUTURE PLANS
coilover suspension
ext wastegate conversion/external dump
CF hood
New paint (pearl white, or charcoal/gunmetal metallic)
Built F20A DOHC...350-400 whp