jdm92_accorn : 1992 Accord LX

[jdm92_accorn]

last night i installed all new suspension components excluding the strut/spring assemblies. new spc front upper ball joints, rear upper adjustable control arm, steering rack with outer tie rods, all 6 lower control arms, shock bushings along with new tires. everything. finally got the weight of the 15" prelude blade, 16.4lbs. man oem bushings beat the hell out of urethane. the urethane bushings were wore out in a matter of 6 months or so. man no more harsh bumps, no more floating just smooth transitions and cornering hard enough that the seats wont hold me in place anymore.

[jdm92_accorn]

a little intake teaser.

[sepulveda87]

^ nice man! thanks for your help with the install of the s2 and lines/hoses.

Oh! btw, i ran a tee fitting instead of drilling and tapping the adapter, and it works! no overheating or anything.

[jdm92_accorn]

wonder how yours didnt overheat and mine did. glad it worked out though. i have tried something new aswell. i side-gapped and indexed a set of NGK 4291's(ZFR6F-11). smoother idle, more responsive throttle and some people have even had whp gains.

[Tishock]

^ nice man! thanks for your help with the install of the s2 and lines/hoses.

Oh! btw, i ran a tee fitting instead of drilling and tapping the adapter, and it works! no overheating or anything.

Can you take a couple of pics or make a diagram where you used the T-fitting? I tried several fixes including T fittings in different locations but could not get it to keep cool any longer than 5-10min. The adapter was the only thing that worked for me.

[jdm92_accorn]

I'm sure he tried the same way you and I did, just he tried it with a horseshoe and a four leaf clover in his pocket, lol.

[Tishock]

Now I know what to add to my tool chest!

[sepulveda87]

mine doesnt over heat because of a new radiator and new waterpump. maybe yalls cooling system is not working that well as for mine is new? lol

[sepulveda87]

Pics as requested. Engine bay dirty guys!

[jdm92_accorn]

Lol. Copycat.

As far as the cooling system, its actually fairly recent. I'm just glad it worked for you.

[SanJoCaF22DrAcc]

Stock 55-60mm tb use the spacer for more low end and any size over 65mm bolt it straight to the lower manifold.

Do you have any pics of this set up? I am almost ready to install my intake set up but I am not sure that the coolant hoses that go through the FIACV will clear the lower runners.

[jdm92_accorn]

You only need the iacv. The rest can be blocked off.

[jdm92_accorn]

Updates: ordered blox 4" velocity stack for aem v2
New k&n 6" filter
70% of funds for cylinder head work &
Header collected

[gloryaccordy]

What kind of header?

[jdm92_accorn]

custom hytech replica for f22a