oneoffaccord : 1990 Accord LX

[excalibur02]

Badass! Never thought you would of went to the vtec side! Hey its a 2.0 so its different!

What's up with that oil cap? Has a custom AN fitting?

Going turbo on this one I'm assuming?

[oneoffaccord]

Badass! Never thought you would of went to the vtec side! Hey its a 2.0 so its different!

What's up with that oil cap? Has a custom AN fitting?

Going turbo on this one I'm assuming?

well the plan was suppose to go like this. have one boosted non-vtec car and the other with a vtec n/a. just so happens plans do not go as planned. this motor was suppose to be for the civic but the h23 rings went. so i just used this one instead. im going to get another f20b in put that in the civic.

its Valve Cover Oil Cap - Breather Adapter

yes im going turbo on this motor. im just waiting on funds so i can buy the turbo manifold. can someone buy my old turbo setup please

[oneoffaccord]

well got a few things done today. installed intake gasket and manifold. ran the wire harness, charge pipe and radiator. i need to get a new upper radiator hose tomorrow. already had a new one but i was too small and short looking. so im going to buy a lower hose and cut it to make it fit

[oneoffaccord]

got my Blox oil sandwich plate for the turbo oil feed line and Blox cam seal. ill install these maybe tomorrow if im not sick still

[Shadow1]

you seem to like Blox a lot. lol.

[oneoffaccord]

you seem to like Blox a lot. lol.

i know i was thinking about that before i should be sponsered by them, lol. well the oil cam seal has 3 seals instead of one or two that most companys have. even the stock seal has one. and for the price i can buy 2 blox seals for one golden eagle one

[Darkcloud]

Nice I was going to do a f20b swap but changed my mind when I found out it couldn't be bar'd in cali

[Shadow1]

i know i was thinking about that before i should be sponsered by them. well the oil cam seal has 3 seals instead of one or two that most companys have. even the stock seal has one. and for the price i can buy 2 blox seals for one golden eagle one

oh ok. i didnt know you were sponsored by them. makes sense now. lol.

[oneoffaccord]

oh ok. i didnt know you were sponsored by them. makes sense now. lol.

im not sponsered by them i should be, being that i buy alot of there shit

[Shadow1]

im not sponsered by them i should be, being that i buy alot of there shit

lol. whats so good about them?

[oneoffaccord]

lol. whats so good about them?

good quality parts for cheap

[oneoffaccord]

heres a little update nothing major really. finally around to installing the blox oil sandwich plate and ran the oil line for the turbo. its not the greatest pic but you get the idea. also about to prime my valve cover today aswell

[1badacc]

you heard about jasons sandwich plate (ebay crap)....if yours has the same prob i think andrew still has his greddy

[baracuda]

heres a little update nothing major really. finally around to installing the blox oil sandwich plate and ran the oil line for the turbo. its not the greatest pic but you get the idea. also about to prime my valve cover today aswell

looking good but,fram is it just a break in filter and going to be changed? i would hate to see such a crappy filter on a nice motor.

[oneoffaccord]

you heard about jasons sandwich plate (ebay crap)....if yours has the same prob i think andrew still has his greddy

yea thats ebay for you. lol. yea eric told me about andrew having one. if its brand new then ill get it. used ill pass. ill buy a new greddy one, they are cheap enough

looking good but,fram is it just a break in filter and going to be changed? i would hate to see such a crappy filter on a nice motor.

i got it for free. im going to run the motor for a like 20 mins then ill do another oil change.