If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Well, I *think* I'm going to get a F22B. I was going to do a H23, then a H23 frank with a rebuilt bottome end, but I've added everything up for a complete rebuild and for a little more I can just get the motor complete, drop it in, and save the down time. I found one on Ebay I'm going to pick up as soon as I figure out where to have it delivered. I'm thinking I'll mill the head to bump the compression, put in a set of 272's and get the P06 tuned and call it a day.
- Rob - 92 Auto Sedan - "Rustoration" 85 Toyota 4Runner
1977 Kawasaki KZ1000/ZX6/10R Hybrid
2008 HD 1200N
2009 HD 883N
Allright, so for those who wanted to know. From the ground to the fender lip, it's sitting 23 inches in front and 23 inches in back (after I raised it 3/4's of an inch). There's just a slight rake to it. I said fuck it and took it out for a quick spin. Felt good, but I've discovered another problem. The power steering is going bye bye. I could hear the tires wanting to grip, but there was Z E R O feedback thru the wheel.
- Rob - 92 Auto Sedan - "Rustoration" 85 Toyota 4Runner
1977 Kawasaki KZ1000/ZX6/10R Hybrid
2008 HD 1200N
2009 HD 883N
Allright, so another big update today. Pics first.....
So I raised the front back up an inch. It's perfect right now, one finger gap, but that might change with the 17's, I dunno. The other pics are teaser shot of more stuff to come.
Stay tuned, it's gonna be a busy month.
Hey bro that s a hella of a nice drop..Honestly with the look I see accord_insprie old ride in the making but thats just me...
accordtypeR aka Seve aka The Godfather.
My Old Baby....................My New Baby SOLD TO..grumpy93, iceplaya123, slr_theking, tn_accords
The last pic you posted..outside and the bumper is kinda hangin off..looks alot better than the earlier pics. Now you can get at least 1 finger in there
Yeah, I measured overall clearance. Lowest point - Mud Flaps - 2 inches.
Next lowest - Oil Pan - 3.5 inches.
Me thinks me might have to build a skid plate for the front of this thing. I'm not willing to tear up the motor. The body parts, could really give two shits less about, but I don't like tearing up drivetrain. I don't really wanna raise it back up either since the handling will be the heart of the car.
And the bumper is just sitting on there. That pos isn't goin back on. Even if I wanted it too, lol.
- Rob - 92 Auto Sedan - "Rustoration" 85 Toyota 4Runner
1977 Kawasaki KZ1000/ZX6/10R Hybrid
2008 HD 1200N
2009 HD 883N
Comment