If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Rebels, my vtec is set at 4700rpms at this moment in time.
Deryk999, the spec to the intercooler is 27"x7"x3 give or take on the length.
Karl, whats up buddy, how is the car running, I had bought the gauge pods for a 94-97 Accord and modified them slightly, a heat, remold and trim sort of modification. I am currently using a Quiafe diff. in my tranny. Best investment that I have made. To bad it took me like 3 years to actually install it in a transmission.
thanks for the info. ....sorry one more question....was there any thing you had to do to make it fit....doesnt seeem like there is a lot of room in there. thanks Deryk.
90 ex-r sedan, charcoal, 95 jdm h22, type S cams, Jun cam gears, Skunk2 valve springs, P28 chipped ecu w/ uberdata, cai, exaust, B&M fpr w/ gauge,mugen lip, 17' IWC wrapped with falken rubber, Bilstein hd, coilvers, black Leather, red/clear tails, Autometer gauges. More to come
I haven't been enjoying the car since the turbo kit has not been installed. I'm waiting to go to settlement this coming Thursday on a home. Then I plan to immediately install the turbo. I need to speak with you about this turbo thing. I need more details. Anyway hopefully I'll see you in Rockville. Possibly tonight.
Originally posted by Deryk999 thanks for the info. ....sorry one more question....was there any thing you had to do to make it fit....doesnt seeem like there is a lot of room in there. thanks Deryk.
You do have to move some stuff around, like the power steering pump cooler, I ended up buying a transmission oil cooler and I placed it and between the headlights right behind the grill.
And you have to trim alot off of the front bumper to make it fit, it also means no factory foglights. I ended up taking out my Piaa foglights cause my intercooler needed to move in.
Originally posted by Accord SiR You do have to move some stuff around, like the power steering pump cooler, I ended up buying a transmission oil cooler and I placed it and between the headlights right behind the grill.
And you have to trim alot off of the front bumper to make it fit, it also means no factory foglights. I ended up taking out my Piaa foglights cause my intercooler needed to move in.
The Fmax Kit fitted perfectly in there? Do U specificly bought a cb7 h22a turbo kit from them or u talk with them to do so for u ?
"NO T ASUSTES MENOS PREOCUPATE TU SOLO C@GATE!!!!"
Nah, the turbo kit was ment for a 92-96 Prelude h22a, I had to modify 2 of the pipes. and I had to use the front cross beam and from motor mount from a 94-97 accord ex. and alot of trimming of the bumper.
Comment