SOLD!
PAGE 7! Spring 2006 CB7Tuner Meet!
This is my 1990 Honda Accord LX sedan.
ENGINE / EXHAUST:
- eBay short ram intake
- 5-speed transmission conversion
- Valve cover, exhaust manifold heat shield, and spark plug wires spray painted Ford Dark Blue
WHEELS / SUSPENSION:
- Stock wheels, minus wheel covers
- Coilover sleeveovers
BRAKES:
- OEM brakes
EXTERIOR:
- Black car originally, but was painted white
- Black vinyl stripes on the sides
- Black wing
- Empty front bumper
- DIY black mesh grille
- DIY Suicide trunk
- '90 taillights painted over white
- '92 outer taillights
- clear corner turn signals
X rear badges shaved off
- dryer vent on right side of front bumper for direct intake
- shaved molding
X hood left black to look like a carbon fiber hood
- Hood primered white
- SunPro tachometer installed on hood
INTERIOR:
- sheet metal center console
- DIY short shifter
- different shift boot
- Push-button ignition
X Toggle switch for the cooling fan (switch is now inactive because the fans were made automatic again during the new engine installation)
- Water and voltage guages above glove box
- Buttons, bezels, and vents painted white
- Aftermarket pedal covers
- Sheet metal driver's floor mat
FUTURE MODIFICATIONS:
- Camaro Z28 louvers in hood
One of my friends bought the car a few years ago and customized it. It's been tossed around from friend-to-friend since. When he fixed the car up he stripped off all the emissions and gained tons of horsepower. He also converted the transmission to a 5-speed transmission. Sleeveover coilovers were added later.
I took the pictures with my brother's digital camera which a friend of his dropped, which accounts for the fuzzy darkness on the right sides of the pictures and the inaccurate date display. Enjoy!
This was a dryer vent added for direct airflow to the cold air intake.
Airflow from the vent on the bumper flows into this hole cut to the cold air intake.
In some pictures you may notice the air filter had fallen off. It does that because the intake wasn't designed for CB7's.
The hoodprop was probably removed because it was always in the way, at least I find they get in the way. =)
The outer taillights were replaced with '92/'93 taillights and the trunk taillights were painted white to blend in with the rest of the car.
PAGE 7! Spring 2006 CB7Tuner Meet!
This is my 1990 Honda Accord LX sedan.
ENGINE / EXHAUST:
- eBay short ram intake
- 5-speed transmission conversion
- Valve cover, exhaust manifold heat shield, and spark plug wires spray painted Ford Dark Blue
WHEELS / SUSPENSION:
- Stock wheels, minus wheel covers
- Coilover sleeveovers
BRAKES:
- OEM brakes
EXTERIOR:
- Black car originally, but was painted white
- Black vinyl stripes on the sides
- Black wing
- Empty front bumper
- DIY black mesh grille
- DIY Suicide trunk
- '90 taillights painted over white
- '92 outer taillights
- clear corner turn signals
X rear badges shaved off
- dryer vent on right side of front bumper for direct intake
- shaved molding
X hood left black to look like a carbon fiber hood
- Hood primered white
- SunPro tachometer installed on hood
INTERIOR:
- sheet metal center console
- DIY short shifter
- different shift boot
- Push-button ignition
X Toggle switch for the cooling fan (switch is now inactive because the fans were made automatic again during the new engine installation)
- Water and voltage guages above glove box
- Buttons, bezels, and vents painted white
- Aftermarket pedal covers
- Sheet metal driver's floor mat
FUTURE MODIFICATIONS:
- Camaro Z28 louvers in hood
One of my friends bought the car a few years ago and customized it. It's been tossed around from friend-to-friend since. When he fixed the car up he stripped off all the emissions and gained tons of horsepower. He also converted the transmission to a 5-speed transmission. Sleeveover coilovers were added later.
I took the pictures with my brother's digital camera which a friend of his dropped, which accounts for the fuzzy darkness on the right sides of the pictures and the inaccurate date display. Enjoy!
This was a dryer vent added for direct airflow to the cold air intake.
Airflow from the vent on the bumper flows into this hole cut to the cold air intake.
In some pictures you may notice the air filter had fallen off. It does that because the intake wasn't designed for CB7's.
The hoodprop was probably removed because it was always in the way, at least I find they get in the way. =)
The outer taillights were replaced with '92/'93 taillights and the trunk taillights were painted white to blend in with the rest of the car.
Comment