i bought the coil used - its a msd baster SS coil. I removed the msd 6a and i just wire my internal dizzy to convert to external. The coil is probably older since this dizzy was on my old f22a4, which i bought with 180K on it. the inside of the dizzy is stamped REMAN. though...I MIGHT have another ignitor in my h22a dizzy that i bought from primocb7, will the ignitor directly swap over?
ask and you shall recieve
Kam - i am using the 4554 NGKs right now, which are 8's. i think thats 3 step colder since stock for a SOHC is a 5. im gapped down to .16 -.19 and it still blows out/sputters/misses under WOT boost. i guess he ran 8's since i am running 20 psi
also, my wideband reading were showing 12's in full boost, but i'll have to datalog just to make sure since i cant really look down to much, lol
ask and you shall recieve
Kam - i am using the 4554 NGKs right now, which are 8's. i think thats 3 step colder since stock for a SOHC is a 5. im gapped down to .16 -.19 and it still blows out/sputters/misses under WOT boost. i guess he ran 8's since i am running 20 psi
also, my wideband reading were showing 12's in full boost, but i'll have to datalog just to make sure since i cant really look down to much, lol
Comment