H311RA151N : 1991 Accord EX

[H311RA151N]

After letting the paint fully cure it has changed it's color a bit.

[H311RA151N]

My F22B DOHC valve cover will be wild. I have some cool ass plans for it.

[PakaloloHonda]

That looks so good ...

[H311RA151N]

Thank you, I was very impressed myself! I didn't put a whole lot of effort in this one as it won't be used very long. But it turned out much better than expected.

[H311RA151N]

[H311RA151N]

I sold a project motorcycle I had sitting around today, an old Honda V65 Magna. Kinda didn't want to sell it I just don't have the room for it.

Anyways, it makes more time and room to do stuff to this. Plus the extra $$$ always helps.

[H311RA151N]

Getting things cleaned up more. CC delete needs to be finished.

[CB7Denmark]

Getting things cleaned up more. CC delete needs to be finished.

Why would you remove the CC? And if you say weight reduction, im gonna laugh considerably hard.

[H311RA151N]

It never worked right and I didn't feel like putting it back in when I changed the belts. I never use CC anyways. It doesn't work well here. Too many hills.

[CB7Denmark]

It never worked right and I didn't feel like putting it back in when I changed the belts. I never use CC anyways. It doesn't work well here. Too many hills.

I suppose that justifies it. Move along now lad.

[H311RA151N]

I suppose that justifies it. Move along now lad.

[sonikaccord]

I removed mine for weight reduction...I could feel the .0001 second I lost. Then I took a dump and shaved off another tenth.

I like where this is going.

[H311RA151N]

I like pulling the cruise control cable and revving the piss out of it. It's a car show thing. Cause I go to a lot of car shows in this car.

[H311RA151N]

Getting my ducks in a row currently, I'm not stalling out on this thing. And it's been in the 100*'s the last week.

[H311RA151N]

Got the direction I want to go with this car figured out.

Copy & pasted from the original MRT description post:









-STAGE ONE-

SUSPENSION & BRAKES

Prothane Red Suspension Bushing Kit
Detroit Axle Steering Rack
Moog Outer Tie Rod Ends
EMPI CV Shafts
Function & Form Type 1 Coilovers
Mevotech Front Camber Kits
Mevotech Rear Camber Shim Kit
Brembo Rear Brake Drums
Wagner Thermoquiet Brake Shoes
Beck/Arnley Rear Brake Hardware Kit
Roca Rear Trailing Arm Bushings

ENGINE & EXHAUST

Front Torque Mount M/T
Vibrant 2.5" Ultra Quiet Resonator
Test Pipe Exhaust Gasket

-STAGE TWO-

REBUILT ENGINE


Ishino Crankcase Gasket Set
NPR 85.5mm Pistons & Rings
Taiho Main Bearings
Taiho Rod Bearings
Dorman Crank Pulley


Bando Accessory Belts
H23 Plenum & TB with A6 Runners (Functional IABs)
Ishino Throttle Body Gasket
Fel Pro ITB Gaskets
Ishino Intake Manifold Gasket
Ishino EGR Valve Gasket
Ishino Header Gasket
Jon's 18 Piece M8 x 1.25mm Stainless Steel Extended Exhaust Manifold Stud Kit
Supertech Vave Stem Seals


JDM F22B DOHC Head
Mitsuboshi Timing Belt H23A1
NPW Water Pump H23A1
Koyo Timing Belt Tensioner F22A
OEM Timing Belt Tensioner Spring F22A
H23A1 Cams & Cam Gears
ARS Camshaft Seals H23A1
Zerg OBD2 To OBD1 Dizzy Harness
OEM Timing Gear Guide H23A1
OEM Lower Timing Gear H23A1
KS Tuned Balance Shaft Elimination Kit

TUNING

AEM Digital Wideband
Universal Gauge Cup
Chipped & Socketed P28 ECU
Custom Tune

TRANSMISSION

Used Transmission $150
Exedy Stage 1 Clutch Kit $305
LUK Flywheel $50
Syncrotech Brass Syncro Rebuild Kit $350
Honda OEM MTF 3 Quarts $30
-$900

-STAGE THREE-

WHEELS & TIRES

XXR 531 16x8 4x114.3 +20 Platinum Wheels
Nitto Neo Gen 205/45/16 Tires
BWR Neo Chrome Extended Lug Nuts

EXTERIOR/BODY

Replacement Front Bumper
Replacement Rear Bumper
Replacement Front Fenders
Replacement Rear Wheel Arches
Salvage Doors
T-R Style Urethane Front Lip
Speedzone Rear Visor
GTO Headlight Covers Modified Into Eyelids.
JDM OEM Visors
Depo Red/Clear Taillights
JDM OEM Side Markers
GTO Smoked Bug Shield
Acura TL Heated Mirrors.

INTERIOR

Wagon Trunk Compartment
Re-fabricated Door Panels
New Carpet
WeatherTech Black Floor Mats
'91 Prelude Steering Wheel