STL_92_Accord : 1990 Accord EX

[STL_92_Accord]

So on cold starts and when in driving on the hw she starts to bog down and it starts to gargel and almost backfire. It does not do it all the time. Everything except the plugs have been replaced and had the fuel injection system cleaned. I did notice a hissing voice coming from the intake manifold near the investors. In thinking that i might need to replace an o-ring or something. But could that be the culprit to my problem

[DejectedAngel]

Try double checking the dizzy cap and rotor just to make sure. I suggest you do that because something similar happened to me and found out the dizzy cap had condensation from I dont know how but I did find a small crack in it.

[STL_92_Accord]

Try double checking the dizzy cap and rotor just to make sure. I suggest you do that because something similar happened to me and found out the dizzy cap had condensation from I dont know how but I did find a small crack in it.

That was going ti be the next thing i check. I have heard that the dizzys on the 90's can have problems. This is my first 90 so i will check that

[Koochologist]

You putting in work right away looks good, love the valve cover.

[SPLCB7]

Love that valve cover!

[STL_92_Accord]

You putting in work right away looks good, love the valve cover.

Trying to when i have time. I work two jobs and go to school. I spent a pretty penny for that piece of art. I was going to put it on right away but i don't want any dirt touching it so when i pull the motor and clean everything.

Love that valve cover!

KeeleDesign made it. Imho branden is the best. He actually used a picture of my valve cover for his Sig for awhile. It took him alot longer than most because of the detail. I was happy with the results of course. He said that it was one of his best

[STL_92_Accord]

So i opened up the dizzy and found some moisture in it cleaned it up and no longer have the bogging down problem anymore FTW but i do have a leak in one of my injectors that needs to be fixed asap

[STL_92_Accord]

Found an Apexi GT Spec Exhaust from a 93 lude with an F22 going to have that retrofitted with a kteller 2.5 ss kit to go along with some cheap header for now until a bisi can be bought. Thinking of doing the Auto to Manuel seatbelt and a p12 ecu that I got form that smae lude I got the exchaust from. Have some work ahead of me and its 110* outside today record heat

[STL_92_Accord]

Ok so I installed the P12 ECU today. Cheap Hp indeed. Found some very good donor cars with awesome leather interiors. And Im going to start doing the Master bushings set as soon as it arrives. Paid 99.95 shipped FTW

[jewelproject]

great start, bro. i dig the valve cover. are you going to built your theme around it? or just for looks?

[STL_92_Accord]

This build i'm going to take my time and get everything perfect and when it is all said and done she will be a clean smooth sleeper a wolf in sheeps clothing. This one is for my mom may she rest in peace. The valve cover will blend in quite nicely with what I have in plan

[STL_92_Accord]

Installed the prelude shifter and cleaned the interior out. Moving along quite nicely. Need to clean the engine bay and install a new thermostat and gasket today

[STL_92_Accord]

So a good friend of mine unfortunately wrecked his 97 prelude. But the suspension and the motor are perfectly fine and for $1,000 he said I could have it FTMFW

[STL_92_Accord]

So it is official im going H buying a wrecked 97 prelude and also going five lug and prelude front seats and prelude cluster while I am at it. Im buying the car for $1000 the only drawback is that its an auto so a new ECU and wiring up the wires from the harness for vtec. Im going to use the tranny that's in Carol Im going to pull the motor and do all that I,need so,u have no problems whatsoever in the future. Im still going to build an f motor at some point this was too good to pass up. Recap H motor five lug swap prelude cluster and prelude front seats all for a grand I WIN!!!!!!

[STL_92_Accord]

Here she is ladies and gents operation acclude about to commence FTW!!!