If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have had these fogs for a while. This whole time they were never functional until today. I need to send out another big thank you to mr mitsubishiv5 himself. He has been a lot of help and I definitely appreciate all of it. Koochologist deserves some thanks as well being that he hooked it up with a complete set of OEM A,B, & C harness.
These are some rough shots I took with my camera phone. Some decent ones should follow soon enough.
Purchased From: busak87, GunRunner, Bruce Banner, Itstatcb7kid707, tJoods, DannyD
Damn ground in first attempt. A+ work still keeping it nice not rice
None the less It went pretty smooth. I have a plan and I need to see it through. I have no doubts that others will follow, yet I need to hurry to beat them to the punch. I hope it continues to turn out this crispy.
Purchased From: busak87, GunRunner, Bruce Banner, Itstatcb7kid707, tJoods, DannyD
Took some shots the other day with Mitsubishiv5, but they all didn't come out too good. I can't figure out how to get crispy clean pics. Everything always comes out with digital noise. Oh well here are 3 of the best shots of the night
Look at them sexy CB7 UDSM fogs blasting those yellow caps!!!
Ass shot
Here is a shot of my CB from the front. You can really notice the blacked out housings from this one. It's definitely unique.
Purchased From: busak87, GunRunner, Bruce Banner, Itstatcb7kid707, tJoods, DannyD
Sucks that I am the only one posting in my thread but oh well.
So this is what I have been up to. I have been working on blacking out the bumper lights next. I picked up some off of eBay and began to crack em open. These are a lot harder to open then the headlamps and fogs. These particular lights were glued together with some sort of krazy glue. Head doesn't affect them the same. I started with the corner lights. First attempt is not salvageable.
The plastic ended up warped. The other side is usable but not perfect. I went on to the bumper lights and lets just say I was able to get some results. they are far from the condition that I was going for but for now they will do. So here is my first attempt at blacking out the bumper lights.
Before
After
Purchased From: busak87, GunRunner, Bruce Banner, Itstatcb7kid707, tJoods, DannyD
Yeah, I am lucky that they came out as well as they did. The corners are another story. I noticed that the clear corners do not come with the clear inner diffuse lens. What gives with that? The apc set that are currently on the car still have that lens inside. I plan on going to the JY and coming up on the OEM inner lens soon.
OH also, the chrome that they use inside these housing does not play well with paint. It didn't come close to the effect that I was going for.
Purchased From: busak87, GunRunner, Bruce Banner, Itstatcb7kid707, tJoods, DannyD
One piecers are in the box that I got them in. I installed them but I didn't like the gaps. I'm currently trying to aquire a set of 90/91's with the chrome moldings. I might end up selling the 92/93's wich is sad because they are minty.
Bad???? Those pictures are sick! I want to get clear blinkers and put amber in them to make some SiT replica blinkers
Trust me bro. The pics hide a lot. At least I got an idea of how it's going to look. They are clear with amber bulbs to stay legal. There is a way to make them look clear that I might try. Little trick from the V-Dubb/Audi guys.
Purchased From: busak87, GunRunner, Bruce Banner, Itstatcb7kid707, tJoods, DannyD
Comment