Tippey764 : 1992 Accord EX (2)

[Mr_Doitagain]

Nice man...your ride takes me back.... My baby was looking like this -the rack...

[Tippey764]

Some pictures i took with Agol today after the junkyard

[Tippey764]

I also installed an 86-90 acura legend power steering fluid dip stick cap



And i found the insturction manual for the roof rack in the car i got the roof rack from

[crazymikey]

Looking good. Love all the little mods you do.

[P5ylance]

the leather insert is that easy to replace!? damn I wish I had me a set. can't find anything out here!

[Tippey764]

the leather insert is that easy to replace!? damn I wish I had me a set. can't find anything out here!

All you need to do is take out the panel and rip the old cloth off and glue the new peice on. You really need a tan interior though. Blue sucks lol.

[P5ylance]

All you need to do is take out the panel and rip the old cloth off and glue the new peice on. You really need a tan interior though. Blue sucks lol.

whoa whoa whoa there, can't wear black without the blue

[Tippey764]

whoa whoa whoa there, can't wear black without the blue

Huh?

[agol]

he has black leather interior.

[Tippey764]

[agol]

did you do the wiring yet?

[Tippey764]

did you do the wiring yet?

Partially,

I wired the driver seats powered feature up so i could adjust it to drive ( passenger seat is manual )

I ran 2 wires, to the interior fuse box OPTION B spot

I solderd blue and red together and they both go to OPTION B and i upped the fuse to a 20 amp to handle the seat

I solderd both grounds together and ran them to a ground near the fuse box used by other things

It looks like an OEM accesory powered seat harness if they existed.

[Tippey764]

Oh here are the seats working durring testing

['93CB7Ex]

howd you hook the heater up? did you use your switches?

[Tippey764]

howd you hook the heater up? did you use your switches?

Im pretty sure the heated seat drawls its power through the red/blue wires so...

All i need to do is hook the switch to 12 volts and run a wire to the white wire, press of the switch will complete the circuit and close the rely alloying the seat to heat up.

I haven't started on the heated seat yet though.