itstatcb7kid707 : 1990 Accord EX (2)

[itstatcb7kid707]

Check your intake manifold gasket, It could be broken, I had a cb that revved 2grand when in park or neutral, found out the intake manifold gasket was broken, ordered a new one on ebay, put it in never had a problem since

Actually i had swapped out the rotor on the TB and turns out the nut on it was loose. I also thought it was the gasket and not too happy about it but i did a vacuum leak and it came out clean.

[1990[H]accordex]

glad to hear you fixed the problem then

[itstatcb7kid707]

Did a test fit.
EP3(2005 Civic Si) Caliper, Direct bolt onto BB6 knuckle.
So this meaning DC5 and Sk2 Calipers bolt on as well.


I will not be using the EP3 calipers.
I will be upgrading to 11.8 Rotors from 11.1

EP3 Rotors will not fit over the BB6 hub.

BB6 hubs are 70.2mm
S2k hubs are 70.3mm
EP3/DC5 62.?mm

[keepinitclean]

I'm liking this! Ae86 and 240sx flares fit btw. And we shall find rear lips one day!

[itstatcb7kid707]

I'm liking this! Ae86 and 240sx flares fit btw. And we shall find rear lips one day!

I test fitted some but they stick out further then i want. I know which ones i want. saw them in person and quality is great. Ill give out who makes em once i get them.

As for rear lips. Im not looking for one. LOL ill have a few aero parts in the rear so the rear lip will be useless for me.


On other note I got power steering back. Bought a belt and fluid.

[itstatcb7kid707]

Traded the Regas for something bigger...


specs: 17x7.5 +50
17x9 +63

[mitsubishiv5]

Please tell me that if you run flares that you're going to actually cut your fenders to actually serve its purpose

Ce29?

[itstatcb7kid707]

Yes I will. Once I fit the wheels on ill be cutting the fenders.

[itstatcb7kid707]

Test fit.
17x7.5 +50 in the front.

tried to use the 17x9 in the front but hits the knuckle. need at least a 15mm spacer.

Tried the 17x7.5 in the rear but it hits also.
Again need a 15 mm spacer to clear.

[Hondalover]

Just read through your whole thread and I love the love you put into this thing. :]
Please keep going with it.

[itstatcb7kid707]

Just read through your whole thread and I love the love you put into this thing. :]
Please keep going with it.

Thank you

[itstatcb7kid707]

More test fitting...
17x9 +63 with a 15mm spacer. CLEARS knuckle.

Now i need to test if 15mm spacer is enough to clear the rears.

[keepinitclean]

Do like. A flare to the fender would be a nice touch.

[itstatcb7kid707]

Do like. A flare to the fender would be a nice touch.

To be honest im not 100% sure if I want to do flares now since it dosnt stick out as much as i thought.

I will be having the fenders rolled so if it still sticks out after that then I may add flares.

[itstatcb7kid707]

Finally got the Battery relocated to the trunk.

Got the spacers i needed, running 15mm on all 4 wheels.

Picked up a legend lip, installing that soon.