brsteinbach : 1990 Accord LX

[keepinitclean]

That's a freaking good idea!!! In order to stop that vibration I'd put a thin layer of foam on the top and bottom, and perhaps extend the screw up a bit so the camera can sit nicely with the newly added material.

[Quashish]

so you undo the rubberband and the bumper can slide off?

[brsteinbach]

That's a freaking good idea!!! In order to stop that vibration I'd put a thin layer of foam on the top and bottom, and perhaps extend the screw up a bit so the camera can sit nicely with the newly added material.

Not a bad idea I'll try that out cause I have some foam from redoing my arm rest.

so you undo the rubberband and the bumper can slide off?

I have it held on with o/rings. But yeah undo those and them there's a couple bolt where the "push pins" were on the bumper support that I just need to take the grill off and pull out. Then the whole cover comes off I made it easy for if I need to get in some where really steep for a photo shoot. I wanna buy new thicker o-rings so it doesn't sag as much.

[AeyJayCB7]

Car looks great man. Haven't really been here on CB7tuner and had to check this out! What kind of rims are they?

[brsteinbach]

Car looks great man. Haven't really been here on CB7tuner and had to check this out! What kind of rims are they?

I'm not exactly sure, they're American Racing but the closest set I can find to them are Eagle 028's. I can't find the real AR wheels.

Thanks though man.

[brsteinbach]

Gotta have the car wash pictures!

















I can not wait for warm weather! I wanna lower my car again and put my wheels back on soooo bad!

[brsteinbach]

Oh and some of my cousin's car.

[brsteinbach]

Put my wheels on yesterday, I need a dslr so I can take some better pics especially at night, I tried to take some last night with my point and shoot and they came out way to blurry even with a tripod, enough talking on with the pics...


Wheels-1 by brsteinbach, on Flickr


Wheels-2 by brsteinbach, on Flickr


Steelies by brsteinbach, on Flickr


Steelies-1 by brsteinbach, on Flickr


Jacking points with steelies by brsteinbach, on Flickr


Steelies height vs Wheels by brsteinbach, on Flickr


One wheel on by brsteinbach, on Flickr


One wheel on-1 by brsteinbach, on Flickr


Wheels at full droop by brsteinbach, on Flickr


Rear wheel poke w full droop by brsteinbach, on Flickr


Front wheel poke at full droop by brsteinbach, on Flickr


Wheels on in the air by brsteinbach, on Flickr


Wheels on drivers side by brsteinbach, on Flickr


Front shot with wheels by brsteinbach, on Flickr


Side shot w wheels by brsteinbach, on Flickr


Front pinch weld by brsteinbach, on Flickr

I didn't touch the suspension height, just put the wheels on, also I didn't drive so it probably went down another 1/4".^


Fitment right after put on by brsteinbach, on Flickr


Fitment right after put on side by brsteinbach, on Flickr

Thanks for looking everybody. Feels good to be low again and have my wheels on, I know its still pretty high but after 4 months of driving at 5" jacking points 3" is pretty low especially when my down pipe, oil pan, and trans sits .5" lower then the pinch welds. :mad

[SanJoCaF22DrAcc]

Aaaaah. That sweet feeling of driving in "win" mode after so long.

[brsteinbach]

Aaaaah. That sweet feeling of driving in "win" mode after so long.

Oh yes, most definitely!

[SanJoCaF22DrAcc]

Look'n good by the way.

[islandhopper]

^
Agreed. I love the raw style this CB has..

[brsteinbach]

Acquired an f22a6 intake manifold from my cousin, It's a full intake mani but I tore it apart to clean it and I am also thinking of buying an H23 plenum.


A6 Mani taken apart by brsteinbach, on Flickr


A6 Mani taken apart 2 by brsteinbach, on Flickr


A6 Mani side by brsteinbach, on Flickr


A6 Mani side 2 by brsteinbach, on Flickr


A6 Mani Dirtyness by brsteinbach, on Flickr


A6 Mani dirty ports by brsteinbach, on Flickr

It's not going to be put on for a while cause I'm going to clean it, track down an H plenum, and buy a heat shielding gasket. -_-

[brsteinbach]

Also put my flushmount back on...

Before:

Withoout flush mount by brsteinbach, on Flickr


Withoout flush mount side by brsteinbach, on Flickr

With:

With flush mount by brsteinbach, on Flickr


With flush mount 2 by brsteinbach, on Flickr

A couple random pic's I'll put in this post since I'm about to blow up my next post lol.


Front garage by brsteinbach, on Flickr


Front garage close by brsteinbach, on Flickr

[brsteinbach]

And finally some pictures I took with my point and shoot and edited them a little with PS.


DSCF1206-1 by brsteinbach, on Flickr


DSCF1207-1 by brsteinbach, on Flickr


DSCF1209-1 by brsteinbach, on Flickr


DSCF1210-1 by brsteinbach, on Flickr


DSCF1213-1 by brsteinbach, on Flickr


DSCF1214-1 by brsteinbach, on Flickr


DSCF1215-1 by brsteinbach, on Flickr


DSCF1216-1 by brsteinbach, on Flickr


DSCF1217-1 by brsteinbach, on Flickr


DSCF1218-1 by brsteinbach, on Flickr


DSCF1220-1 by brsteinbach, on Flickr


DSCF1221-1 by brsteinbach, on Flickr


DSCF1225-1 by brsteinbach, on Flickr


DSCF1226-1 by brsteinbach, on Flickr


DSCF1228-1 by brsteinbach, on Flickr


DSCF1230-1 by brsteinbach, on Flickr


DSCF1232-1 by brsteinbach, on Flickr


DSCF1233-1 by brsteinbach, on Flickr


DSCF1234-1 by brsteinbach, on Flickr


DSCF1235-1 by brsteinbach, on Flickr


DSCF1236-1 by brsteinbach, on Flickr


DSCF1238-1 by brsteinbach, on Flickr


DSCF1243-1 by brsteinbach, on Flickr


DSCF1244-1 by brsteinbach, on Flickr


DSCF1247-1 by brsteinbach, on Flickr


DSCF1248-1 by brsteinbach, on Flickr


DSCF1249-1 by brsteinbach, on Flickr

Sorry for whoring once again, I love my car