JoshM : 1992 Accord EX

[JoshM]

well im going to try the pussy way frist. cleaning without opening them up . and then if i see im not getting anywhere im going to open them up .

Any temp you think would be good

and they should jst come apart with a little bit of pressure right .

You can try putting a toothbrush in the turn signal holes to try to loosen the dirt up. Then stick a vacuum cleaner in there to try to suck up the dirtiness.

If you try the oven method: seperate them carefully with a screwdriver once they're warmed up.

[93SM4_CB7]

You can try putting a toothbrush in the turn signal holes to try to loosen the dirt up. Then stick a vacuum cleaner in there to try to suck up the dirtiness.

If you try the oven method: seperate them carefully with a screwdriver once they're warmed up.

ill prob do that to one of them now, and see how it goes , ill let take pics and post

Gracias Amigo

[JoshM]

Gracias Amigo

De nada.

[90Cb7sleeper]

Whats wrong w/ neuspeed races?

[JoshM]

Whats wrong w/ neuspeed races?

Not low enough. The D2 springs are 2.5"F, 2.25"R. lol
But, if the Neuspeeds were considerably less, I suppose they'd do.

But, I'm leaning more towards sleeves. After looking at flatline's CB, I'm in love with the 16x8 +15's again.

[MikeW]

Ive been saying that all along, but NO...everyone wants 16s.

[JoshM]

What do you mean?

[93SM4_CB7]

i grew a pair and opened them up. thanks for the advice i thought i was fucked with shitting dirty lights foreeeeeeevvvver

[JoshM]

Did you get them cleaned up and resealed?

[93SM4_CB7]

Did you get them cleaned up and resealed?

check out my MRT i posted pictures. but i reused the glue that was already there and there was alot. im going to reseal around the gaps today with clear silicon.

[JoshM]

Wow! They look MUCH better

[JoshM]

Well, the exhaust is a little better now. It's not scraping on flat ground anymore.

Going Nic's dad on Tuesday. He's probably going to have to take a sawzall to it and reweld it.

The good news, Nic welded up a hole that was in the exhaust. Now it sounds even better.

[Clean_4th gen]

Glad to hear the good news! When you going to raise it?

[JoshM]

If I get 16" wheels, I won't.
If I get 17" wheels, I will after I buy them.

[Clean_4th gen]

If I get 16" wheels, I won't.
If I get 17" wheels, I will after I buy them.

I still think the 17"s look better! I got the DF210's yesterday, BTW!