If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The best is yet to come, i got my hands on an h23 head milled down .3 tenths.... getting some crower cams reground to gude specs. new valve train. my dc sports header is gona be installed soon.. oh yeah and P&P baby....
ps the light out put licks ass, but ive gotten used to it so now worries...
Hey man, Ive been doing some searching on my swap, and Im thinkin about the f22b, about how much would that run, also everything on a f22a1 will bolt up to this engine-throttle body, tranny, intake, header, etc?? What about the wiring, does it use all the a1 wiring harnesses and sensors? Is this a pretty easy swap, I mean would I be able to do it, (never done a engine swap, heck I dont even know alot about engines....but I think I would be able to). Any info you can give me would be appreciated.
Jay
Hittin Switches - Draggin XhaustAlways Under Construction
Yeah pretty its a straight forward swap, but somethings you have to test... i know the header bolts up, the distributor parts-cap-rotor- need to be from A1, the intake manifold wont bolt up because the F22b is a duel runner mani.
i had to change a sensor from the A1 to the f22b, bcause it didnt have it. where the water hose from the radiator on the top comes across to the head... on the head there is a housing that has a sensor on it. so yeah pretty straight forward.
Thanks, what about aftermarket parts, like cams and such, can you use the ones from a H23, since the F22b is the JDM version of it, right? What about tranny, I dont want to use mine, cuz its about shot, so can I use a H23 tranny, or H22, or will I have to get the F22b tranny? Same for axles, do I use the a1, b or h23? How much does a full F22b swap cost, not installation. Thanks again.
Jay
Hittin Switches - Draggin XhaustAlways Under Construction
Originally posted by akkordlayinkit Thanks, what about aftermarket parts, like cams and such, can you use the ones from a H23, since the F22b is the JDM version of it, right? What about tranny, I dont want to use mine, cuz its about shot, so can I use a H23 tranny, or H22, or will I have to get the F22b tranny? Same for axles, do I use the a1, b or h23? How much does a full F22b swap cost, not installation. Thanks again.
Jay
yes all h23 after market parts are for this engine.. you can get h22 h23 tranny and shit.... use accord axles... hmm, some one on here said they got theres for 1400$ for full swap
but i got my motor for 500 dollars, plus p14 ecu(h23 ecu was 60 bucks)
hmm and h23 tranny i will buy soon, prob 300 bucks... so
Comment