90ACCORDLXGUY : 1990 Accord LX

[c91bse7]

It was nice meeting you today, hope those lights serve you well

[1993 CB7 LX]

Thanks man. I don't have any wheel spacers on my car.

howd you get them so flush? just the offset that they were?

i want to get that look someday, im kinda getting sick of the tucked thing.

[90ACCORDLXGUY]

It was nice meeting you today, hope those lights serve you well

Nice meeting you as well. They will, don't know if I want to retrofit them or
leave them stock since they are pretty clean.

howd you get them so flush? just the offset that they were?

i want to get that look someday, im kinda getting sick of the tucked thing.

Combination of the right offset, width of the wheel, size of the tires, amount of
camber, and how low you are will make them sit flush.

[c91bse7]

I'd leave um and retro these one peicers but that's just me

[1993 CB7 LX]

what offset were those wheels? if you remember

[keepinitclean]

DAT XENON LIP!!! Yea buddy, the car is looking excellent as always!!

[90ACCORDLXGUY]

I'd leave um and retro these one peicers but that's just me

I would do that but I can't use my G-Square grill with the one-piecers. The chrome (when I get the trim) makes it so you can't screw the grill in.

what offset were those wheels? if you remember

+38, it is the last set of wheels in the list on my first page.

DAT XENON LIP!!! Yea buddy, the car is looking excellent as always!!

Thanks man! More to come soon...



Update:

Finally got around to putting in my amber clock

Untitled by NButtz, on Flickr

Also got my Sparco hood pins in the mail and installed them on the hood...

Untitled by NButtz, on Flickr


Untitled by NButtz, on Flickr

[c91bse7]

Well crap, guess ill sell my g square rep since it doesn't fit well with oem headlights and now you say they won't work with the one peicers!

A fun fact you may or may not know is that edm lights and one piecers use the same beam bowls , so if you retrofit you can swap it out if you like

[90ACCORDLXGUY]

Well crap, guess ill sell my g square rep since it doesn't fit well with oem headlights and now you say they won't work with the one peicers!

A fun fact you may or may not know is that edm lights and one piecers use the same beam bowls , so if you retrofit you can swap it out if you like

Yeah it does suck, plus it looks kind of funny or atleast since mine is paint matched.

I had a feeling that they would be the same bowls and now I know that they are for sure.

[c91bse7]

Yeah with usdms there's an unsightly , broken look to it and another thing about edm/Jdm lights the only difference is the lenses everything else is the same.

[90ACCORDLXGUY]

Yeah with usdms there's an unsightly , broken look to it and another thing about edm/Jdm lights the only difference is the lenses everything else is the same.

Hmmm... My grill didn't look too bad with the USDM headlights I think (click me for pictures).

Yeah I noticed that they look a lot alike each other.

[c91bse7]

Yours looks better then mine, probably cause mines a replica :thumbsdown:
Does yours rub on your bumper in like the middle?

[90ACCORDLXGUY]

Yours looks better then mine, probably cause mines a replica :thumbsdown:
Does yours rub on your bumper in like the middle?

I'm not sure. It might be just barely touching the bumper.

[90ACCORDLXGUY]

Been a couple weeks since I have really done anything to the car. Last week I
finally took out the ES bushings from the rear motor mount. Vibrated the whole
car and didn't like that one bit. The motor mount looks fine so I didn't really need
the bushings.

While doing that I figured out my transmission is leaking really bad, found a big
puddle of Honda MTF under the car. So it looks like I will either be putting the
old transmission in like I should have when I took the motor out, or I will be re-
sealing the M2S4.

Also I am hoping to have enough money saved up by the end of the month to
finally buy the rest of the front suspension components. Then I can start
driving it again without worrying about anything going out while on the road.

The next update will have better pictures with my actual camera instead of my phone. lol.

One last thing..... I should be starting my EDM 2pc / E55 retrofit soon!

[c91bse7]

Pics of the retro or it didn't happen!
Hope to see this thing on the road soon.