thanks guys for the comments,and flip as for the shroud i used a lil bit of jb weld on top and bottom,im just hoping they come out as good as yours did.
Announcement
Collapse
No announcement yet.
tsx projectors
Collapse
X
-
I was wondering what it would look like with the blackhoused and blackened shroud back when I was figuring out what direction I wanted to go with mine. Good luck with it and I look forward to seeing the final product on the car."This is a jaded bunch. To gain notice, you have to challenge conventional wisdom, test assumptions, and ignore the naysayers."
FS Part out thread koni/skunk2 suspension, jdm pole, HID retrofit, Tanabe exhaust
http://www.cb7tuner.com/vbb/showthre...10#post2119010
Comment
-
thanks bro, i also have jdm ones on my 93 accord that is in my sig, the other accord which i did these for is a 90 accord which is my daily driver, i just wanted to try this project and see if i could do it, it just takes time and patience, but at the end it payed off, i really like the output on the tsx projectors, nice and clean, i will post pics of them agaisnt the wall once i install them on the car, thanks again for the comments.
Comment
-
Originally posted by Ralphieyea mang looking clean. if someone does a write up i might take that project on. How long did it take you and how much cost wise?
new headlights $120, e46 shrouds $50, and about $30 or so for the materials i used, and also alot of patience and determination.
Comment
-
Looks good so far. Still waiting for pics installed. These look quite interesting blackhoused."This is a jaded bunch. To gain notice, you have to challenge conventional wisdom, test assumptions, and ignore the naysayers."
FS Part out thread koni/skunk2 suspension, jdm pole, HID retrofit, Tanabe exhaust
http://www.cb7tuner.com/vbb/showthre...10#post2119010
Comment
Comment