im thinking about 1 or 2
Announcement
Collapse
No announcement yet.
tsx projectors
Collapse
X
-
CLICK ON SIG FOR MEMBERS RIDE
"2SIIC"
Authentic Jerseys for sale
http://www.cb7tuner.com/vbb/showthread.php?t=188314
-
Originally posted by AirRide Accordyup those look like the ones i sold, cause i didnt have the h4 or h1 bulbs when i did, but yeah those are it
I never did find the sns headlights I looked for the guy on ebay and found some guy in la and bought it from him, but it ended up being depo headlights which looked really nice too.
Do you have any pictures of your headlight on the car? and when you installed them did you make a wiring harness? Also where did you mount the ballast?
Comment
-
Originally posted by Prez808How is the back attached? From the pics, it looks like the back of the accord light housing is chopped off, and the projector is dropped in from the front? How do you seal all that up?
Comment
-
Originally posted by d112crzyget pics up!!
do you think you can get some more pics of the back of it? like, to see how theyre sealed and all?
Comment
-
Well im not sure if its really necessary but i did it just in case they did fog up, i wanted to do a good job, and i didnt want to leave it open then after i put them on the car, let them sit over night and in the morning i would have moister in them, then i would have to take off the bumper and seal them up, so i just did it like that, just so i wouldnt have to do double work
Comment
-
so i take it once they are in there is no way to adjust them? reason i ask is im in the middle of my retrofit and im trying to figure out a design using four screws attached to a plate similar to the one you have covering your projector. two screws will be for left/right adjustment and the other two for up/down
"...B*tch got out the car lookin more like Freddy Jackson"
Comment
-
well the way i have my mounted is 4 8mm bolts to the factory refelctor and the way i adjusted was first i put them on the car without the front glass, then truned them on and i tighten the 4 8mm bolts pretty much even on both against the wall untill they were pretty much straight then i took the lights off, and sealed them up, and now i just use the factory adjustment screws to adjust them a lil more if i want, but the factory adjust screws do everything just like if i had regular oem bulbs in them
Comment
-
Originally posted by AirRide Accordwell the way i have my mounted is 4 8mm bolts to the factory refelctor and the way i adjusted was first i put them on the car without the front glass, then truned them on and i tighten the 4 8mm bolts pretty much even on both against the wall untill they were pretty much straight then i took the lights off, and sealed them up, and now i just use the factory adjustment screws to adjust them a lil more if i want, but the factory adjust screws do everything just like if i had regular oem bulbs in them
Comment
-
Originally posted by AirRide Accordyea i have philips 3g ballast and there pretty small, lets hope yours are aimed right, if not try using the factory adjusting srews, do you have pics of yours?
Comment
-
hey those look good man
CLICK ON SIG FOR MEMBERS RIDE
"2SIIC"
Authentic Jerseys for sale
http://www.cb7tuner.com/vbb/showthread.php?t=188314
Comment
Comment