hey guys just thought i would post up some work i did tonight in 14 degree weather
this is what i am working with
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8128_zps00526510.jpg)
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8126_zps2d10e621.jpg)
headers are new in this pic but i had them on my sedan and not in this condition now lol
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/100_4947.jpg)
i have a 22" resonator and an 18" resonator that i would like to use
here i cut off about four inches of pipe and the flange from the down pipe
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8138_zpsbdef80e7.jpg)
i plan to mate my 2" diameter down pipe with my 2.5" cat
the notch in the hanger is what i plan to trim to make more room for my resonators
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8137_zps93b24f35.jpg)
hanger trimmed and cleaned
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8139_zps45412ffe.jpg)
mocked up
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8140_zps738027de.jpg)
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8141_zps9b795179.jpg)
i did get this piece welded up but no pics tonight but will post them tomorrow
FYI i am using a harbor freight $90 dollar special that is about 4.5 years old. my liner was so cold when welding that the wire could not be fed at a steady pace and was so stiff it could hardly bend at all.
i had to keep it straight as possible and could only weld in the overhead position.
this is what i am working with
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8128_zps00526510.jpg)
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8126_zps2d10e621.jpg)
headers are new in this pic but i had them on my sedan and not in this condition now lol
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/100_4947.jpg)
i have a 22" resonator and an 18" resonator that i would like to use
here i cut off about four inches of pipe and the flange from the down pipe
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8138_zpsbdef80e7.jpg)
i plan to mate my 2" diameter down pipe with my 2.5" cat
the notch in the hanger is what i plan to trim to make more room for my resonators
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8137_zps93b24f35.jpg)
hanger trimmed and cleaned
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8139_zps45412ffe.jpg)
mocked up
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8140_zps738027de.jpg)
![](http://i215.photobucket.com/albums/cc265/thebasemententertainment/IMG_8141_zps9b795179.jpg)
i did get this piece welded up but no pics tonight but will post them tomorrow
FYI i am using a harbor freight $90 dollar special that is about 4.5 years old. my liner was so cold when welding that the wire could not be fed at a steady pace and was so stiff it could hardly bend at all.
i had to keep it straight as possible and could only weld in the overhead position.