SUSP: All Camber Kit info

[Tnwagn]

i'm curious how much physical movement do the adjustable ball joint produce?
they claim to be 1 degree adjustable.

There are two different ranges

1) -1.5* to +1.5* of camber adjustment
http://www.spcalignment.com/PROD_DIR...d2=67145&cmd3=

2) +1.5* to +3.0* of camber adjustment
http://www.spcalignment.com/PROD_DIR...67340(8)&cmd3=

[cb9wagon]

that is part of the info, i need to know the physical movement that the camber device used moves the component that achieves the 1.5 degrees .

if someone had installed theirs recently i was looking for a rough measurement of the movement the adj. (balljoint or bushing) provides. from my current info it seems to lengthen the upper arm about 1/2inch per 1 degree of camber

this info can be used to calculate the lower arm position

[Accord1320]

There are two different ranges

1) -1.5* to +1.5* of camber adjustment
http://www.spcalignment.com/PROD_DIR...d2=67145&cmd3=

2) +1.5* to +3.0* of camber adjustment
http://www.spcalignment.com/PROD_DIR...67340(8)&cmd3=

I'm trying to click on the #2 spc kit but it wont work... Is it just me or is it not working at all?

[steelbluesleepR]

I'm trying to click on the #2 spc kit but it wont work... Is it just me or is it not working at all?

Well that link is more than 6 years old. SPC's website sucks on mobile, so I can't get you the updated links, but Google can.