SUSP: Camber Measure and Rear Washer Trick

[sublime]

if any one needs a rear and or front camber kit let me know.

yeah... what kind of front kit is it?

[accordztech]

yeah... what kind of front kit is it?

ingalls, not the ball joint style, the other one.

[Akira_kj]

the bolts are m10-1.25 x 50 hex cap screws metric fine pitch

[Akira_kj]

before my rear camber was -1.9 left and -1.3 right


I put 3 washers on the left and 2 on the right... they look better than my front thats nearly -1.0

[wed3k]

just a little source of info...

i used two 3/8" Homedepot washers and my alignment sheet came out to negative one degree.

[TysCb7]

I used three washers and was at negative 1.

[Akira_kj]

When my megan rear toe arms get here Ill get the rear realigned and well have a 1/2 decent way to tell how much each washer does. No bumping what so ever on the upper arm/inner fender.

[texasvtak]

I used two washers in the back with the H techs, took it to a shop to get the front aligned and they said the rear was at perfect zero.

[90ACCORDLXGUY]

This is definitely what I will be doing once I lower my car. Good job Russ.

[bcjammerx]

awe..pictures are broken

[brownhornet]

Just the info I needed. Damn I love this place.

[Smokinspeeds]

great writeup.