SUSP: Front 5-lug Conversion

[timmy0tool]

they don't suck, but they will NOT perform at it's full potential from what they are designed to from the factory. they are still tons better than your OEM brakes.

read more here:
http://www.cb7tuner.com/vbb/showthre...legend+caliper

back on topic, i never knew 6th gen front 5-lug knuckles would fit! good stuff! the rear you can keep a drum setup (though i wouldn't).
http://www.cb7tuner.com/vbb/showthread.php?t=146386

[swk_cb7]

so if I read this right


I can take the knuckle off a 03 Tl and put this directly on to my 92 cb9 without hassle? which caliper will be needed?



one of these > http://www.ebay.com/itm/99-03-ACURA-...122543&vxp=mtr



And what of the rear? is there a direct bolt on or do I find the thread about the rear replacement ?

thanks I'm still learning and truly appreciate the help

I haven't did the rear yet but on my 93 CB9 ex I used1 st.gen odyssey knuckles and my calipers . It was plug and play!!!

[bobbycos]

I found it easier to just pull the complete knuckles off an 01/02 accordingly v6 direct bolt on. .

^^^agreed. i took the knuckles off 03 tl. simple plug n play for the front, nothin else needed from another car.

i used the 02 TL and was done in the front in an hours

[swk_cb7]

what are you guys doing for the rear?(disk)

[bobbycos]

what are you guys doing for the rear?(disk)

prelude hubs

[drummersteve7]

odyssey new hubs are hard to find, anyone have a location?

I can get the bearings all day but I need hub assembly!

thanks in advance.

[wildBill83]

Use 97 Prelude hub assembly (same as 1997-2001 CRV front hubs)
Honda part number: 44600-S47-000