bump
Announcement
Collapse
No announcement yet.
SUSP: ROH Conversion with 282mm rotors
Collapse
X
-
Just picked up a set of Legend Calipers for $16 at the pull-a-part. Looks like my DD accord is going ROHLast edited by GunRunner; 05-02-2011, 09:14 AM.-1992 Accord EX H22 234whp 185wtq
-1993 Accord EX SOLD
-1995 Accord EX Wagon Daily Driver
-2012 GMC Canyon V8 4x4
Comment
-
Question: Do the 98 CL 2.3 hub&bearings fit in the CB Accord knuckle or do you need only the hubs? I have found a good price on the CL hub&bearing already pressed together new.-1992 Accord EX H22 234whp 185wtq
-1993 Accord EX SOLD
-1995 Accord EX Wagon Daily Driver
-2012 GMC Canyon V8 4x4
Comment
-
Originally posted by GunRunner View PostQuestion: Do the 98 CL 2.3 hub&bearings fit in the CB Accord knuckle or do you need only the hubs? I have found a good price on the CL hub&bearing already pressed together new.
Kmart and stacey both have ROH set ups if you want to get used.
Bought from: TypeG,mak,CB7_ACCORD,ChampCoupe,Blackex
Traded with: Cb7xChun
Sold to: Rob_is_legend,DaddyO,daheavyking
Sedan MR Thread Coupe MR Thread Prelude Si MR Thread
My huge For Sale Thread
Comment
-
Originally posted by darkfusion42 View PostThey are interchangable.
Kmart and stacey both have ROH set ups if you want to get used.-1992 Accord EX H22 234whp 185wtq
-1993 Accord EX SOLD
-1995 Accord EX Wagon Daily Driver
-2012 GMC Canyon V8 4x4
Comment
-
Originally posted by darkfusion42 View PostThey are interchangable.
So why is all of the ROH conversions that I have read, list the parts separately instead of just saying get the whole thing?
Thanks.
Comment
-
Correct^ go to yard. Find a roh cl. 2.2 or 3.0. Same setup. Take out the hub and bearing which is already pressed together, remove the 4 bolts in the back... and walahhh. Now u have the first main part of the roh swap.
GuNnRunner? Wat is the stamping on the calipers? I went and got cb9 calipers.**Blk Housed Slut Crew Member #1**
**Don't b scared be prepared for the worst**
Da Drizzle's Sedan - Dr. Diy's Blk Housed Thread
'90 2Tone Coupe-Car Heaven_'89 Lude-Junk Yard
Mostly Usdm, some Jdm,Edm,&Puerto Rican RICE
Comment
-
Originally posted by F20A CB7 View PostCorrect^ go to yard. Find a roh cl. 2.2 or 3.0. Same setup. Take out the hub and bearing which is already pressed together, remove the 4 bolts in the back... and walahhh. Now u have the first main part of the roh swap.
GuNnRunner? Wat is the stamping on the calipers? I went and got cb9 calipers.
Thanks.
Comment
-
I sent tippy a message about this b4... he said 2.2 and 3.0 hub and bearings are the same..
I meant 2.3 my bad.
There's a 2.2 c from 1997 l but its roh I think its hor only friend**Blk Housed Slut Crew Member #1**
**Don't b scared be prepared for the worst**
Da Drizzle's Sedan - Dr. Diy's Blk Housed Thread
'90 2Tone Coupe-Car Heaven_'89 Lude-Junk Yard
Mostly Usdm, some Jdm,Edm,&Puerto Rican RICE
Comment
-
So looking at the steps, I am puzzle that the rotor is held on to the hub/bearing by 4 bolts in the front. Why can't we just take the front 4 bolts that hold the rotor on and remove the rotor without having to remove the hub/bearing? I would guess the hardest thing is we have to take the big 36mm axle nut off before we could take the rotor off. So I figure why can't we just take the axle nut off then the 4 bolts that hold the rotor on and the rotor should just come off right?
Thanks.
Comment
-
Originally posted by Bad_dude View PostSo looking at the steps, I am puzzle that the rotor is held on to the hub/bearing by 4 bolts in the front. Why can't we just take the front 4 bolts that hold the rotor on and remove the rotor without having to remove the hub/bearing? I would guess the hardest thing is we have to take the big 36mm axle nut off before we could take the rotor off. So I figure why can't we just take the axle nut off then the 4 bolts that hold the rotor on and the rotor should just come off right?
Thanks.Last edited by 92accordcb7ex; 05-18-2012, 07:26 AM.
Comment
-
Originally posted by Cam View PostRequired:
- New or re-use CB Accord front wheel bearings. (If re-using your old ones they need to be pressed out from the hub)
- 98 Acura CL 2.3 front wheel hubs (pressed onto bearings)
- 94 Prelude VTIR 282mm front brake rotors
- 23T Prelude caliper brackets
- 97 Prelude calipers/92 Accord wagon calipers with brake pads to match
Comment
-
Originally posted by baracuda View PostWere are people buying their 2.3 CL hubs? All I can find is the bearing assembly but no hubs were the rotor bolts on too.. can any one help track these down or know who carries them?
I picked mine up through bernardi parts online and sourced the bearing from my local auto parts store.
Robert
Comment
Comment