INT : Prelude cluster install

[jdmboi type s]

I wantttttt oneeeee !!! sick modd!!!!!!

[P5ylance]

hey lucifer, i dont understand why you have prelude a13 seatbelt indicator connected to 757-6, s light cancel on your image diagrams at the beginning. can you explain?

it should be 758-6, right?

edit: on further inspection, a lot of the wires dont seem to match up on your "prelude wiring diagram," and ive checked for both differences between the year breaks. arent we matching wires, feature to feature?

[P5ylance]

this is what i came up with, just by using your diagrams, but not the right half of the prelude diagram. im gonna check with my manual to see if there are major differences between 92's and your diagrams

[lucifer1]

Yes, I believe it should be 758-6. When I made the cross reference chart, I referenced the etm but there are several mistakes in the etm and that is one them. The etm has it as c757-6 in two spots and I didn't catch it. The service manual actually calls c2. It is correctly listed on my pinout of the c758

I tried to be very thorough when making this but it was a lot of referencing back and forth between different section of the etm and service manual for 1990 and the connectors I took pictures of at the junkyard for the newer clusters. There also maybe variations of the prelude cluster that are different from the one I have.

What other issues do you have?

[lucifer1]

Ok, I see a major f up on my part, I have c758 and c757 labeled backwards. That would cause some issues when looking at it. I will fix that and go back through the chart.

[lucifer1]

OK. I labeled the connectors correctly now. It will make more sense now.

What year car are you doing this on? The cross reference is made off of my car with the early 10 and 16 pin connectors so their will be some difference to the later 7 and 18 pin connectors

[P5ylance]

I have a 1992 accord EX, so I took your accord pigtail diagram and blacked out the early 90's diagrams when I was putting together my drawing

[P5ylance]

hehe and yeah, I figured it was labeled backwards. Probably were tired of seeing all the errors in the cross referencing and slipped a bit, no biggie! I did with what we had and created mine, but would like to update so we can revise the drawings.

[loud92CB7]

so im dying to see a working bb6 cluster in the dash. so has anyone got all the kinks and miss labeling figured out? id like to do this with my 93 SE. what was the purpose of the changing the icons?

[P5ylance]

loud92cb7, good to see you again!

as for your 93 SE, the pinouts that Lucifer has won't be all correct, so when I did mine I used a 92-93 wiring diagram. The Prelude pinouts that Lucifer provides are correct though, so you can use that as a Zero.

for the most part, c757 and c758 are mislabeled. c757 plug is actually the c758 plug referred to in the prelude pinout, and the c758 is the c757 plug referred to in the prelude pinout.

do you have access to a factory service manual?

[HenRoc]

Would it be easier to just to de-pin and re-pin the pig tails?

[owequitit]

Nice to finally see a writeup. Pretty much the same way I did mine, but I never had time to do the writeup.

[excalibur02]

pictures rehosted and uploaded.

[NH-503P-3]

This is awesome now that’s it’s back up. Much needed info. But I’ve still got one issue and of course I can’t read it because the diagram font is so small.
It is the B13 blu/red wire that comes from fuse 9 in the harness to the “bulb check circuit” in the Accord cluster. Maybe I don’t need it if the prelude cluster doesn’t have one but from what I see it ties into the left & right turn indicators and the brake indicator light at B10

[aleks77]

Im trying to do this on my 91 LX (base model) Canadian car and my 7 pin connector is no problem but the other 2 are totally different colors/pin locations. I cant seem to find the right wiring diagram.