INT: JDM Digital Climate Control

[Julianachos]

Oh my godddddddddddddddddddd finally!

[lucifer1]

One last question before I go yarding tomorrow, I hopeyou get this question in time: where exactly is that legend fan located?? I've so far taken out the ac controller, center console, the metal frame, so now all I see is the fat rectangular white assembly which is what I'm stuck on. I don't quite know where to go next

Fan? You mean the inside air temp sensor fan? You don't need that if you use a aspirator mounted to the heater box.

You can use either method to draw air over the sensor. The fan is the older way the cb7 came with, and the aspirator is the newer way.

The fan in the gen2 legend is on the climate control unit. It has to be the auto climate unit and not the standard unit

[P5ylance]

Ahhh hehe I realized the car I was thrashing the thing was already gone but didn't know it! I went to a different legend and was able to find the fan. So its one or the other, eh? I may just go with the aspirator then, since its in the diy more

Oh and I found the coolant sensor! Its in a slot on the passenger side under the white air contraption by passenger left foot. No need to remove the glove box and all you do is press down on the wire/sensor and slide it out. Its in there firm cuz of a metal clip spring so you kinda gotta pull at it.

Other than the dcc and aspirator, all parts have been collected! Thank you lucifer, and when it comes time to wire ill be back haha

[P5ylance]

Ahh another question: for the heater valve solenoid, I cut the wires so I have the wires coming from the solenoid. For the 4th terminal, do I need additional hardware to get it installed in there? I'm pretty sure I don't just jam a wire in there with a bare end. Do I cut off a spare pigtail from an emissions box from the yard to use?

[lucifer1]

Yeah just grab an emissions box connector and pull out the terminals to use in your connector.

[lucifer1]

http://www.dchautomotiveparts.com/pa...el/heater-unit

No 7 in the picture

[P5ylance]

Cool pulled out two terminals and to fans for the hell of it, which I might just power up and mess around wih. Waiting on a chance to go see the dealer for the piece and yup!

[P5ylance]

im back! i pulled out my dash and will soon be attempting this mod!

[honda4674]

Major major props on this write up. This is a lot of work and you did an amazing job!!

[sonikaccord]

DCC Part Locations:

[Jarrett]

Speaking of Legend...

[lbus9168]

does anyone have the missing photobucket images? theres about 30% missing.

Installing my DCC very soon and it would be very helpful.

Cheers.

disregard i did sort out finding the photos my apologies!

oh, and my dcc install is nearly done. thanks to this guide ive nearly completed the install (not including time to remove dash or reinstall dash) in 7 hours on my RHD cb9! insanity.

Thank you so much!

[Jarrett]

Do you still have access to the pictures you found? If so, I can restore them on this thread for others to use.

[lbus9168]

Theyre all there now using This Link on chrome.

[NH-503P-3]

Jarrett if you could just re post all of Lucifer1’s pics in all of his diy’s including his MRT that would be swell. Lol. He has some of the best and most useful info on here. Thanks!