TSX projector Retrofit in USDM housings

[nostringz]

very good write up. the pvc thing is nice, but i saw a guy use the end of a bottle with twist off cap - it was tight *i think this is the link http://www.cardomain.com/ride/578450/3 - nissan maxima

i wanna do this the tsx retrofit on jdm headlamps - how long did it take to adjust the projectors?

[maroonaccord2.2]

very good write up. the pvc thing is nice, but i saw a guy use the end of a bottle with twist off cap - it was tight *i think this is the link http://www.cardomain.com/ride/578450/3 - nissan maxima

i wanna do this the tsx retrofit on jdm headlamps - how long did it take to adjust the projectors?

It didn't take too long, but the major adjusting has to be completed BEFORE the glass is re-installed. (mainly the left/right or horizontal adjustment) Then, you can use the factory adjusters to fine tune the cutoffs.

[maroonaccord2.2]

have your lights fogged up or anything after the you put them back on

It's been 6 months, and I've had ZERO problems with my retrofit. Countless miles and hours on them, all weather imaginable with no leaking, fogging, or failure.

I STILL get excited when the ballasts fire up and watch the color shift and intensify....

[goodfellayung'n]

thas nice!!!!!!!!

[King James]

What wire gauge did you use for the harness?

[maroonaccord2.2]

What wire gauge did you use for the harness?

12 gauge I believe, better too big that too small. All soldered, heat shrinked, no crimps if at all possible.

[JDM_honda_PIG]

that shit looks flippin sweet dude, awesome job!

[HenRoc]

dude are those air horns on your car?

[maroonaccord2.2]

that shit looks flippin sweet dude, awesome job!

Thank you kind sir....

dude are those air horns on your car?

Hell yes, why not right?! lol

[93 cb7 ex]

will you sell your headlights? or make another tsx retrofit? lmk ill be interested

[maroonaccord2.2]

will you sell your headlights? or make another tsx retrofit? lmk ill be interested

If you are interested yes, I could build another set. Don't expect to pay any less than $500 for ALL of the parts though, and my labor is not free. So your looking at $700+ It's really an expensive lighting upgrade.....

[King James]

If you are interested yes, I could build another set. Don't expect to pay any less than $500 for ALL of the parts though, and my labor is not free. So your looking at $700+ It's really an expensive lighting upgrade.....

this is very true....I didnt realize how expensive my hid retro would actually turn out to be.

[Smokinspeeds]

shweeet.... still not sure if I'd want to do a retro on my edm cb5's or if I just want HIDs, but this makes me a bit more comfortable about doing a retro.