EXT: Corner lens blackout

[GunRunner]

well I did one of mine becasue its already scratched up and had a small crack around the edge. I also painted more than what is shown in the how to pics becasue I didnt like the way it looked when it was black and the was still alot of chrome showing. I know the chrome reflects the light, but this project was just for fun, I will be using my amber corners because I loke em better. I also used my dremel and cut off part of the clear plastic that holds the orange reflector in, I pretty much made it an even amount of clear plasitc all the way around the reflector. PICS!!!!!!!1!!!!!111!

[Sobeman81]

bump for the haynes manual in the background hondatuner4267...everyone should have one of these IMO...makes life so much more easier its unbelievable...pe@ce love and chicken grease from the middle east..

SHO

[eriemoto.]

bump for new pics please? the originals aren't working for me

[Gripology]

bump, would love to do this, but the pics are working for me either.

[ACCORDianate]

yeah they were removed by someone being triggerhappy while clearing online storage (oops). I'll see about getting some new ones made up.

[Skunk138cb7]

nice diy man, you just inspired me to do this as im bored and this will suffice until i get my amber corners

[eriemoto.]

can you rehost the pics?

i can't get the lense off for crap on my clear corners. it feels like it will break so easily... any tips to get the lense off?

[ACCORDianate]

I'm going to have to reshoot the series; my comp took a dump and lost a lot of pics.

[eriemoto.]

I'm going to have to reshoot the series; my comp took a dump and lost a lot of pics.

cool thanks. is there anyway to get the lense off easier? i can't get anywhere with a screwdriver and prying at it

[accordztech]

haha can we get a fix pics?

[t3chtun3r]

Hey would cops pull you over and give you a ticket in CA if u did this mod?

[npor]

haha can we get a fix pics?

truee.

[blackedout]

i know this thread is old but i wonder how it would look if you bought some black housed corners then took the clear/amber plastic off of an OEM corner and put it on the aftermarket BH one?... reason being.. i have a set of the black housed and i can get the OEM ones for free..

[Phempa]

Ok.... so if I don't have access to a heat gun, what's the best method for separating the corner lens?

Note, I am working with EDM corner lenses... I havn't compared them to USDM, so I dunno if there's a difference.

Mine are squished together and appear to be fused or melted together.

Here's a pic... sorry about the quailty



note, in between the pink dots is where the lens meets the backing.

Looks like the lens is melted on.

[Prez808]

I've been told the heat gun will work if used carefully. Same with oven method. There's a how to on I think it's accordtuner?