EXT: DIY NO Melt aftermarket bumper lights

[AmznAzn]

cant you just run LED bulbs to prevent melting?
and thx for the info!

[pninja82]

Are you sure thats aluminium ? it looks like galvinized and if its in the roofing section it probably is so it wont polish like aluminiun

It was listed as "galvanized aluminum shingle flashing". As for LED's I'm not too sure.

[blackoutt]

It should stay cooler running leds...hey when you turn your flashers on the white light blinks with the orange?I wanna do this now

[AmznAzn]

It should stay cooler running leds...hey when you turn your flashers on the white light blinks with the orange?I wanna do this now

x2
Wont the white just wash out the amber signal?

[Accrdwgnguy]

I never had a problem with my aftermarket clears, but hey I did buy them in 2006 and they are built exactly like oem's

[pninja82]

I never had a problem with my aftermarket clears, but hey I did buy them in 2006 and they are built exactly like oem's

The housing on the ones I got are built just like OEM but, the plastic they used is thin and seems different than OEM.

[pninja82]

It should stay cooler running leds...hey when you turn your flashers on the white light blinks with the orange?I wanna do this now

I'm gonna try LEDs too.Also, yes the amber will still blink while the white stays on.You can see it blink as well.I actually tried to capture it on picture but I think my camera is a bit to slow!

[dee18701]

I'm gonna try LEDs too.Also, yes the amber will still blink while the white stays on.You can see it blink as well.I actually tried to capture it on picture but I think my camera is a bit to slow!

Aahhh you just gotta try it a few hundred times and hope to get lucky...lol

[pninja82]

Aahhh you just gotta try it a few hundred times and hope to get lucky...lol

Lol, I did! My neighbors were tripping out on me because I began swearing after so many failed attempts so, I finally gave up!

[F20A CB7]

Its like 2 lights in 1 neat

[pninja82]

Its like 2 lights in 1 neat

Exactly, thanks.

[rossisalvage]

Exactly, thanks.

Nice. I did it alittle differently, I took the bumper light and moved it into my corner light. Its a larger bulb than the corner light so I had to dremel the corner housing and silicone it in. Then I just got yellow fogs and put them in my bumper lights. So when I use my turn signal just the corner flashes and the fogs stay on.

[cb7_with_snail]

This is sick

[pninja82]

Nice. I did it alittle differently, I took the bumper light and moved it into my corner light. Its a larger bulb than the corner light so I had to dremel the corner housing and silicone it in. Then I just got yellow fogs and put them in my bumper lights. So when I use my turn signal just the corner flashes and the fogs stay on.

That's actually how mine are done also