EXT: Bumper DRL's

[C91BLX7]

I wired my bumper lights directly into my corner lights and now i have weird problems. My signal bulb doesnt flash when i arm my alar.
And they sonr function as their sposed to. Meaning they dont come on with the first click. But they do when i turn headlights on too.. second click.

Corner lights are sensitive. The ICU can short and cause all kinds of strange problems. (ICU is the brown/black box at the top of the interior fuse panel.)

[Accord_exR]

So what do u recomend... ever since i did this my chime works for when the lights are on.. and the car turna over with the key.... always had to use push start... wtf

[Accord_exR]

So both orange wires run to 87a?? How does the relay determine whats what when u are signaling?

Also im wondering if i can reverse the output... the drls are brighter when nothing is on can i reverse wiring some how to ultimately reverse what filament im using?

[CB7 R3ason]

Can I use a 4 pin relay it has every pin but the 87a pin can I just attach the lights to the 87 pin or not ?? Thanks

[C91BLX7]

MAKE SURE you put it to 87a, other wise the DRL's will only come on when the running lights are on

Can I use a 4 pin relay it has every pin but the 87a pin can I just attach the lights to the 87 pin or not ?? Thanks

^

[CB7 R3ason]

yea i just read that right after I posted haha if i decide to just use 4 pin relay and i do hook it up to the 87 pin when i turn my low beams on will the drl lights turn off....i have retrofitted lights and i have no use for the high beam side so im taking your concept and putting it into the high beams instead of the bumper lights....