Step # 11
Photo of new lower tube seals or O-rings installed. Be careful not to encounter any sharp metal edges when installing these, as to not slit them. Put a light coat of oil on all four O-rings before installing them.
** EDIT - There is NO NEED for Hondabond or any RTV/silicone on these O-rings. It was a false alarm on my previous comment with oil seeping into cylinder #2 spark plug tube. I checked it ~ 25,000 miles after this job was done and there is NO OIL IN ANY OF THE TUBES. **
Photo of new lower tube seals or O-rings installed. Be careful not to encounter any sharp metal edges when installing these, as to not slit them. Put a light coat of oil on all four O-rings before installing them.
** EDIT - There is NO NEED for Hondabond or any RTV/silicone on these O-rings. It was a false alarm on my previous comment with oil seeping into cylinder #2 spark plug tube. I checked it ~ 25,000 miles after this job was done and there is NO OIL IN ANY OF THE TUBES. **
Comment