well here's what i did.
disconnect the hoses and throttle cable
take off 4 nuts with a 12mm socket and unplug tps
take off 3 screws with a 10mm
what the guts look like
the infamous white "thingy". turn it clockwise until tight
how it should look after being tightened
reap the benefits: cold idle start
and the "warmed up and rippin on it" idle... gotta love the redline=)
disconnect the hoses and throttle cable
take off 4 nuts with a 12mm socket and unplug tps
take off 3 screws with a 10mm
what the guts look like
the infamous white "thingy". turn it clockwise until tight
how it should look after being tightened
reap the benefits: cold idle start
and the "warmed up and rippin on it" idle... gotta love the redline=)
Comment